Discussion
Subject: Re: [asterisk-users] Question on system command 1.4.43
On 01/03/2012 08:48 AM, Jerry Geis wrote:
> I have a USB to serial converter attached to my box. pl2303: Prolific
> PL2303 USB to serial adaptor driver
> if I login to the box and send/receive serial commands o
On 01/03/2012 08:48 AM, Jerry Geis wrote:
I have a USB to serial converter attached to my box.
if I login to the box and send/receive serial commands over this unit
it works without error EVERY time.
however, if I run the same command set from with-in the extensions.conf
with System() I g
On 01/03/2012 08:48 AM, Jerry Geis wrote:
I have a USB to serial converter attached to my box. pl2303: Prolific
PL2303 USB to serial adaptor driver
if I login to the box and send/receive serial commands over this unit
it works without error EVERY time.
however, if I run the same command set f
Jerry Geis wrote:
Any ideas on what might be happening here?
If Asterisk isn't running as root, my guess would be a permissions issue.
By the way, out of curiosity, what does "usbserial -start" do? I'm
guessing, some type of paging busy notification?
Doug
--
Ben Franklin quote:
"Thos
Does the user Asterisk is running as have access to this device?
Thanks!!
- Original message -
> I have a USB to serial converter attached to my box. pl2303: Prolific
> PL2303 USB to serial adaptor driver
> if I login to the box and send/receive serial commands over this unit it
> w
I have a USB to serial converter attached to my box. pl2303: Prolific
PL2303 USB to serial adaptor driver
if I login to the box and send/receive serial commands over this unit it
works without error EVERY time.
however, if I run the same command set from with-in the extensions.conf
with Syste