I seem to be having a habit of following up my own posts lately. For
posterity, if anyone is experiencing the errors below, there is a good
chance the telco has configured inbound signalling on an RBS T1 as "Pulse
Dial". I finally spoke with an engineer at the telco today and they
switched i
ent: Monday, February 02, 2009 6:24 PM
> Subject: [asterisk-users] RBS T1 DID issue
>
>
>>
>> Howdy,
>>
>> New installation, trying to connect an RBS T1 with AMI/D4 framing and E&M
>> Wink. Using a Sangoma A102d and asterisk 1.4.22-2 on Centos5 (Trixbox
>> 2.6
you need to port you zaptel.conf & zapata.conf (might be
channel-additional.conf in trixbox)
Bart
- Original Message -
From: "Jeff LaCoursiere"
To:
Sent: Monday, February 02, 2009 6:24 PM
Subject: [asterisk-users] RBS T1 DID issue
>
> Howdy,
>
> New insta
Howdy,
New installation, trying to connect an RBS T1 with AMI/D4 framing and E&M
Wink. Using a Sangoma A102d and asterisk 1.4.22-2 on Centos5 (Trixbox
2.6.2.1).
Outbound calls work fine, but inbound calls fail to read the DID
information, and with debug set to 10 I get the following:
[Feb
