> Can I use my Linksys PAP2 with asterisk and an analog CLIP phone to > show the Caller number on the phone. > There's a "Caller ID Method:" option on Regional settings, but I > tested all options, and my CLIP phone never shows the Caller number...
It should work fine. First, verify that you have for Line 1 (if phone connected to port 1): CID Serv: yes CIDCW Serv: yes and for User 1: CID Setting: yes CIDCW Setting: yes Of course, you must not answer until several seconds after the first ring completes. If you are using distinctive ring (or Default Ring is not 1), there are many subtleties that may be causing your trouble; try without it. If no luck, use a butt-set or similar to check whether CID modem tones are present after the first ring. If yes: Test the phone on a POTS line or another service to be sure CID is working ok. If so, try playing with ringing voltage, frequency, or waveform. If no: Use SIP Debug (or networking tools) to look at the SIP received by the PAP2; confirm that Asterisk is sending valid CID info. --Stewart _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users