:
span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs
-Original Message-
From: Michael L. Young [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 03, 2007 9:37 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Sangoma A102 w/ EC module gets
intermittent
I've replaced 2XTE110 with an A102 with echo cancellation specifically to
deal with echo problems. However, user feedback has indicated to me that on
some calls (not a lot, but some) the call is unusable, with audio
artifiacts, described by one user, as: very bad phasing reverb feedback
(from my
Aha, it just happened to me, so now I can characterize the audio: It
basically sounds like it's missing every other sample - fuzzy and distorted.
Timing?
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To
Zaptel.conf:
loadzone = us
span=1,1,0,esf,b8zs
span=2,1,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
Just a quick thought in looking at the settings above, it appears that you
have set both spans as the primary timing source. I am pretty sure that
only one span should be the
'
Subject: RE: [asterisk-users] Sangoma A102 w/ EC module gets
intermittent echo/audio artifacts
Zaptel.conf:
loadzone = us
span=1,1,0,esf,b8zs
span=2,1,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
Just a quick thought in looking at the settings above, it appears that you
have set
Colin Anderson wrote:
I've replaced 2XTE110 with an A102 with echo cancellation specifically to
deal with echo problems. However, user feedback has indicated to me that on
some calls (not a lot, but some) the call is unusable, with audio
artifiacts, described by one user, as: very bad phasing