Hi,
Armin wrote:
How does your dialplan look like? If you have e.g.
exten = _.,1,
in the context for capi incoming calls, then asterisk (chan-capi)
accept these calls even if not all numbers are dialed (transmitted) yet.
we found the reason for our problem, but not yet the
On Thu, 13 Dec 2007, Stefan Guenther wrote:
Hi,
Armin wrote:
How does your dialplan look like? If you have e.g.
exten = _.,1,
in the context for capi incoming calls, then asterisk (chan-capi)
accept these calls even if not all numbers are dialed (transmitted) yet.
we found the
Hi,
Armin wrote:
Again, same question. How does your dialplan look like?
If you have a rule _. (which means 4 digits OR MORE), then there
is a match even if other digits follow. Make sure your dialplan
will accept the call only if all digits are dialed.
here is the relevant part:
On Thu, Dec 13, 2007 at 10:26:59AM -0500, Steve Totaro wrote:
Stefan Guenther wrote:
exten = 940331,3,DIAL(CAPI/g2/${EXTEN:4},20,tr)
How do your zap conf files look?
chan_capi is used in this thread.
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL
Stefan Guenther wrote:
Hi,
Armin wrote:
Again, same question. How does your dialplan look like?
If you have a rule _. (which means 4 digits OR MORE), then there
is a match even if other digits follow. Make sure your dialplan
will accept the call only if all digits are dialed.
Tzafrir Cohen wrote:
On Thu, Dec 13, 2007 at 10:26:59AM -0500, Steve Totaro wrote:
Stefan Guenther wrote:
exten = 940331,3,DIAL(CAPI/g2/${EXTEN:4},20,tr)
How do your zap conf files look?
chan_capi is used in this thread.
I have never used
On Thu, 13 Dec 2007, Stefan Guenther wrote:
Hi,
Armin wrote:
Again, same question. How does your dialplan look like?
If you have a rule _. (which means 4 digits OR MORE), then there
is a match even if other digits follow. Make sure your dialplan
will accept the call only if all digits
On Thu, 13 Dec 2007, Stefan Guenther wrote:
Hi,
Armin wrote:
That looks corrct so far, numbers with just 94033 should not be
accepted, because of no match.
I then added a context to match those, too.
Otherwise I would loose these calls.
What type of ISDN line do you have?
4 BRI
On Thu, 13 Dec 2007, Steve Totaro wrote:
Tzafrir Cohen wrote:
On Thu, Dec 13, 2007 at 10:26:59AM -0500, Steve Totaro wrote:
Stefan Guenther wrote:
exten = 940331,3,DIAL(CAPI/g2/${EXTEN:4},20,tr)
How do your zap conf files look?
chan_capi is used in this thread.
I have
Hi,
Armin wrote:
That looks corrct so far, numbers with just 94033 should not be
accepted, because of no match.
I then added a context to match those, too.
Otherwise I would loose these calls.
What type of ISDN line do you have?
4 BRI (Anlagenanschluß) connected to an EICON 4 BRI8M
And
Hi,
Armin wrote:
Okay, but then the setting in capi.conf
isdnmode=MSN
is wrong. For 'Anlagenanschluss' you need
isdnmode=did
Okay , I changed that.
These options are no general options, these are for the port sections
only:
immediate=yes
The example capi.conf says about this
On Thu, 13 Dec 2007, Stefan Guenther wrote:
Hi,
Armin wrote:
Okay, but then the setting in capi.conf
isdnmode=MSN
is wrong. For 'Anlagenanschluss' you need
isdnmode=did
Okay , I changed that.
These options are no general options, these are for the port sections
only:
Hi,
Does this number (you are dialing) has been ported from a different
Telco?
When you dial from the other city and you get service not available
you may be dialing from a different Telco that either has no route
aggreement for the dialed network, or the number portability database
On Fri, 7 Dec 2007, Stefan Guenther wrote:
Hi,
Does this number (you are dialing) has been ported from a different
Telco?
When you dial from the other city and you get service not available
you may be dialing from a different Telco that either has no route
aggreement for the dialed
Does this number (you are dialing) has been ported from a different Telco?
When you dial from the other city and you get service not available you
may be dialing from a different Telco that either has no route aggreement
for the dialed network, or the number portability database (of Out of city
Hi,
after I fixed my problem with the playback() application, I now have the
next strange one.
When I dial the number of our client, located in another town, I get a
connection to the asterisk server, I can talk to my client or listen to
his mailbox.
If some in the town of this client calls
16 matches
Mail list logo
