is. Better yet several sites that list some kind of walk through are completely different from each other. Any help would be greatly appreciated.
Thanks
Julian
From: [EMAIL PROTECTED]To: asterisk-users@lists.digium.comDate: Mon, 30 Oct 2006 19:45:50 +Subject: [asterisk-users] TE110P Card
Hi
Hi Groupies,I am sort of new to the whole asterisk thing, especially when it comes to the Digium TE110P card. Does anyone have experience setting this up? If so can you help me out? The provider for the PRI is going to be ATT/SBC.ThanksJulian
___
I guess you've solved this already.. but just in case, you should rmmod zaptel and modprobe it again.. I'm pretty sure you had a different version of zaptel loaded and you should be using the new one.
On Wed, 2005-06-22 at 15:58 +, MSEYE wrote:
Hi everybody !
I'm trying to setup
Hi everybody !
I'm trying to setup a TE110P card. But i'm facind this
error... and * cannot start.
[chan_zap.so]Jun 22 11:50:33 WARNING[16384]:
loader.c:248 ast_load_resource: /usr/lib/asterisk/modules/chan_zap.so:
undefined symbol: pri_dump_infoJun 22 11:50:33 WARNING[16384]: loader.c:429
Hi All, I just installed a TE110P card and I'm trying to compile the
code. I followed to the letter the instructions. This is what happens.
[EMAIL PROTECTED] zaptel]# make clean
rm -f torisatool makefw tor2fw.h
rm -f zttool
rm -f *.o ztcfg tzdriver sethdlc sethdlc-new
rm -f zonedata.lo
I discovered my computer is 5v and the TE110P is 3.3V Could these
errors be because there was no card?
Michael D Schelin wrote:
Hi All, I just installed a TE110P card and I'm trying to compile the
code. I followed to the letter the instructions. This is what happens.
I am trying to use TE110p card for Euro ISDN with Ericsson AMS switch. I
consistently get one of the following errors:
PRI got event: HDLC Abort (6) on Primary D-channel of span 1
or
PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
My zaptel.conf file:
Am Donnerstag 17 März 2005 12:26 schrieb J Thomas:
I am trying to use TE110p card for Euro ISDN with Ericsson AMS switch. I
consistently get one of the following errors:
PRI got event: HDLC Abort (6) on Primary D-channel of span 1
or
PRI got event: HDLC Bad FCS (8) on Primary D-channel of
