Hello, I am trying to get a Wildcard TE110P to work in a relatively
modern HP Proliant DL385p Gen8 server. Being a potent 12 core Opteron
server I expected no problems.
Much to my dismay the dahdi_test results are constantly terrible:
# dahdi_test
Opened pseudo dahdi interface, measuring accurac
On Mon, May 12, 2014 at 4:57 PM, Mike Leddy wrote:
>
> [ 39.223031] wcopenpci: Module loaded
> [ 39.751770] wcte1xxp: Setting yellow alarm
>
> # dahdi_hardware
> pci::06:00.0 wcte11xp+e159:0001 Digium Wildcard TE110P T1/E1
> Board
>
Mike,
This stuff predates my time on this proj
Thanks Russ,
I blacklisted wcopenpci, and i noticed an improvement:
# dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
91.973% 96.242% 94.423% 77.932% 97.654% 87.114% 68.750% 87.417%
75.768% 95.693% 93.086% 77.936% 87.283% 92.996% 77.942% 77.926%
77.943% 89.545% 93.949% 87.032%
On Tue, May 13, 2014 at 7:28 AM, Mike Leddy wrote:
>
> But on examination the /etc/init.d/dahdi start was only loading
> the dahdi module.
>
With this in mind I might start looking around the system for things which
might cause jitter in the servicing of system timer interrupts:
Are you running
Thanks again Russ,
Just a quick reply for now.
No virtualization, but yes I am running a tickless kernel:
#
# Processor type and features
#
CONFIG_NO_HZ=y
Standard for debian kernels. I booted with nohz=off and the behaviour
changed. Unfortunately for the worse:
# dahdi_test
Opened pseudo dah
I remembered I have an older box with a Wildcard TE12xP that
uses the wcte12xp module with a newer 3.9.11 kernel that works
perfectly.
I setup the problematic machine with the same kernel in the hope
that this might be relevant. Unfortunately the same situation
persists.
I used the /proc/tim
...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Mike Leddy
Sent: Wednesday, May 14, 2014 3:43 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Terrible dahdi_test results
I remembered I have an older box with a Wildcard TE12xP that uses the wcte12xp
module
ike Leddy
> Sent: Wednesday, May 14, 2014 3:43 PM
> To: asterisk-users@lists.digium.com
> Subject: Re: [asterisk-users] Terrible dahdi_test results
>
>
> I remembered I have an older box with a Wildcard TE12xP that uses the
> wcte12xp module with a newer 3.9.11 kernel that
On Wed, May 14, 2014 at 3:41 PM, Mike Leddy wrote:
> Hi Eric,
>
> I plugged an E1 into the card and it doesn't make any difference.
Check to see if the card is interrupting 1000 times per second with
something like:
cat /proc/interrupts | grep wc && sleep 1 && cat /proc/interrupts | grep wc
Yo
Thanks again Russ,
I did as you described:
[ 1777.393179] dahdi: Version: 2.7.0.1
[ 1777.393995] dahdi: Telephony Interface Registered on major 196
[ 1789.943167] dahdi: Warning: Span DAHDI_DUMMY/1 didn't specify a
spantype. Please fix driver!
[ 1789.943865] dahdi_dummy: Trying to load High Resol
On Thu, May 15, 2014 at 9:10 AM, Mike Leddy wrote:
>
> --- Results after 72 passes ---
> Best: 99.401% -- Worst: 69.357% -- Average: 90.260025%
> Cummulative Accuracy (not per pass): 92.402
>
> I suspect it may not be good enough yet for production but a
> step in the right direction :-)
>
What w
Hi Russ,
I rebooted the machine loading dahdi_dummy in /etc/modules before
the /etc/init.d/dahdi.
Now dahdi_test shows a nearly perfect score:
# dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
99.998% 99.990% 99.998% 99.996% 99.998% 99.998% 99.997% 99.997%
99.998% 99.997% 99.99
Hi Russ,
Sorry I didn't send that... Here's a few runs:
# cat /proc/interrupts | grep wc && sleep 1 && cat /proc/interrupts | grep wc
28:1682906 0 0 0 0 0
0 0 0 0 0 0 IR-IO-APIC-fasteoi
w
On 15/05/14 16:28, Mike Leddy wrote:
Hi Russ,
I rebooted the machine loading dahdi_dummy in /etc/modules before
the /etc/init.d/dahdi.
Now dahdi_test shows a nearly perfect score:
# dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
99.998% 99.990% 99.998% 99.996% 99.998% 99.998%
Thanks for the suggestion Gareth,
The span line I'm using is:
span=1,1,0,ccs,hdb3,crc4
Its the same as used with the TE12xP that is normally used on this
E1 line in production which is extremely stable.
I did as you suggested using:
span=1,0,0,ccs,hdb3,crc4
After a dahdi_cfg pretty much the s
On Thu, May 15, 2014 at 12:28:44PM -0300, Mike Leddy wrote:
> Hi Russ,
>
> I rebooted the machine loading dahdi_dummy in /etc/modules before
> the /etc/init.d/dahdi.
Unless you're using a relatively old version of dahdi, there's no
separate module called dahdi_dummy. It is an alias to the main da
16 matches
Mail list logo