: Wednesday, May 1, 2019 12:15 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Account code PJSIP
Does anyone know how to set accountcode into the asterisk CDR when using PJSIP?
I have tried Set(CHANNEL(accountcode)=XX) and a few other older ways...
nothing
Does anyone know how to set accountcode into the asterisk CDR when using PJSIP?
I have tried Set(CHANNEL(accountcode)=XX) and a few other older ways...
nothing works.
If I add accountcode into the pjsip endpoint config it works... but I need to
set it via dialplan.
Any help is much
On 2015-03-02 22:53, ricky gutierrez wrote:
Hi list , I have a question with account codes, all my outgoing calls
are authenticated, but now the boss wants to monitor these calls with
the codes.
example: maria has an extension 110, but peter was in place and use
the phone maria , maria then
Hi list , I have a question with account codes, all my outgoing calls
are authenticated, but now the boss wants to monitor these calls with
the codes.
example: maria has an extension 110, but peter was in place and use
the phone maria , maria then says that she did not make that call to
that
Looking for quotes on a very simple script that will require a pin
number before allowing a call to be placed. The pin number would be
recorded to their mysql CDR. Thank you.
--
_
-- Bandwidth and Colocation Provided by
On Tuesday 17 Apr 2012, cjwstudios wrote:
Looking for quotes on a very simple script that will require a pin
number before allowing a call to be placed. The pin number would be
recorded to their mysql CDR. Thank you.
Will the DISA application do what you need?
Regards,
-- Raj
--
Raj
-users-boun...@lists.digium.com] On Behalf Of Raj Mathur
(??? ?)
Sent: Tuesday, April 17, 2012 1:11 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Account code script needed.
On Tuesday 17 Apr 2012, cjwstudios wrote:
Looking for quotes on a very simple script
I am trying to track inbound and outbound calls by user. In sip.conf, I can
add an account code so that all outbound calls from user1 have that as the
accountcode in CDR, so that works fine. For inbound, if someone calls user1
direct, I can set the account code in the dial plan like this and it
I should also expand this to note that I have also tested the amaflags
variable and it also has no effect on my sip peer entries' cdr records.
(latest stable asterisk has been tested)
Matt Hess wrote:
My cdrs are missing accountcodes for incoming calls from other
asterisk servers..
I've seen
Scenario #1:
SIP UA 1 - Asterisk - PSTN
CDR shows account code of SIP UA 1; as expected, works great.
Scenario #2:
PSTN - Asterisk - SIP UA 1
CDR shows no account code.
How can I get the account code of SIP UA 1 to appear in the CDR of
Scenario #2?
Unless someone else has a better
Could you use ForkCDR.
Regards.
From: Matthew Boehm [EMAIL PROTECTED]
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Account Code in all cases?
Date: Thu, 5 May 2005 13:52:29 -0500
@lists.digium.com
Subject: [Asterisk-Users] Account Code in all cases?
Date: Thu, 5 May 2005 13:52:29 -0500
Scenario #1:
SIP UA 1 - Asterisk - PSTN
CDR shows account code of SIP UA 1; as expected, works great.
Scenario #2:
PSTN - Asterisk - SIP UA 1
CDR shows no account code
do:
SetVar(CDR(accountcode)=value)
On 5/5/05, Matthew Boehm [EMAIL PROTECTED] wrote:
Scenario #1:
SIP UA 1 - Asterisk - PSTN
CDR shows account code of SIP UA 1; as expected, works great.
Scenario #2:
PSTN - Asterisk - SIP UA 1
CDR shows no account code.
How can I get the
Yes, but how do I do it automatically like when a SIP call is made?
Plus, on some DIDs I don't know which phone will answer until after it has
answered.
-Matthew
C F wrote:
do:
SetVar(CDR(accountcode)=value)
On 5/5/05, Matthew Boehm [EMAIL PROTECTED] wrote:
Scenario #1:
SIP UA 1 -
Before the issuing the dial command issue the setvar command like this:
exten = 1234,1,SetVar(CDR(accountcode)=value)
exten = 1234,2,Dial(SIP/whatever)
this should take care of it.
On 5/5/05, Matthew Boehm [EMAIL PROTECTED] wrote:
Yes, but how do I do it automatically like when a SIP call is
15 matches
Mail list logo