in as a replacement and see what happens then (remember
> to back yours up).
>
> BTW - you don't need to include dahdi-channels.conf in the above - as
> it's already included.
>
>
> -----Original Message-
> From: asterisk-users-boun...@lists.digium.com
> [mailt
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Albert
Sent: 21 February 2011 13:53
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] calls are not going thru e1 line
Hi Andrew,
I am using current versions of software, find below vers
Hi Andrew,
I am using current versions of software, find below versions:
1.) asterisk
voice:~# asterisk -V
Asterisk 1.8.2.3
2.)dahdi
*CLI> dahdi show version
DAHDI Version: 2.4.0 Echo Canceller: MG2
3.) lipri
*CLI> pri show version
libpri version: 1.4.11.5
I've already tried to call over each
sterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Albert
Sent: 17 February 2011 16:56
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] calls are not going thru e1 line
On 17.02.2011 17:47, Danny Nicholas wrote:
Post your "dahdi sh
On 17.02.2011 17:47, Danny Nicholas wrote:
>
> Post your "dahdi show channels" output.
>
> Have you checked the lines with a regular handset?
here it is:
*CLI> dahdi show status
Description Alarms IRQbpviol CRC4
Fra Codi Options LBO
T2XXP (PCI) Card 0 Span 1
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Albert
Sent: Thursday, February 17, 2011 10:42 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] calls are not going thru e1
Hi everyone,
I have fresh installation of e1 line with 15 B channels, but
unfortunately calls are not going thru.
Do you know what could be wrong with config at my end? Or maybe this is
something with telco? Any hint will do :)
I am getting following debug:
-