Hi,
If the 'fax show version' command doesn't work on your system it will
also indicate you don't have the 'res_fax' module installed, thus you
won't be able to take advantage of the T.38 gateway functionality, did
you try the command?
You're indicating you are having problems with IAX regis
Hi. the fax show version does not work since i am not using the digium
modem.
the iax2 show peers is the command for me and the output is:
PBX*CLI> iax2 show peers
Name/UsernameHost Mask Port Status
Description
iaxmodem/iaxmod 127.0.0.1 (S) 255.255.255
I suspect I followed a guide much like the one you have used including
information found on voip-info - sorry, I can't seem to find any
bookmarks of relevant information.
I spent an enormous amount of time getting it working and working very
well, the real issue was getting T.38 working - I ap
Hi. Since I am messing a lot with it without seeing the end of, may I ask if there is any solid guide for that please?
On 13/11/2016, 07:42 Larry Moore wrote:
Some additional information which may help you with your installation.
I have 4 IAX Modems named iaxmodem0 - iaxmodem3. I
Some additional information which may help you with your installation.
I have 4 IAX Modems named iaxmodem0 - iaxmodem3. I use iaxmodem3 for
outbound fax transmissions.
I created a queue for the other 3 modems, here is my entry in queues.conf:
[hylafax-iax]
strategy=linear
ringinuse=y
Is your network/firewall configuration permitting the ports for UDPTL,
runn the command: udptl show config
UDPTL Global options
udptlstart: 4000
udptlend:4999
udptlfecentries: 3
udptlfecspan:3
use_even_ports: No
udptlchecksums: Yes
Thanks for the reply. i am looking for a guide to help me setup from
scratch this. the OS is raspbian (debian in raspberry). any ideas?
On 12/11/2016 12:55 πμ, Victor Villarreal wrote:
Hi John!
I'm not sure why are you using iaxmodem... I use it a few years ago
with Asterisk 1.4
In Aster
Hi John!
I'm not sure why are you using iaxmodem... I use it a few years ago with
Asterisk 1.4
In Asterisk v11 fax is managed using res_fax. Please see
https://wiki.asterisk.org/wiki/display/AST/Asterisk+11+Application_ReceiveFAX_res_fax
You only need download, compile and install the spandsp
hi. i am using asterisk 11.24.1 in my raspberry. i do have a sip trunk with a provider with g711a. I am trying to setup a fax server by following the guide in http://the-asterisk-book.com/1.6/faxserver.html.
i do live in Greece and the number is 00302112152130
the problem is that i am getting