I have set the clock source from MASTER to NORMAL in the sangoma card
settings, and I'm still getting 3RD_T2_TIMEOUT error codes:
-- Channel 'DAHDI/i1/-4' FAX session '3' is complete, result:
'FAILED' (FAX_FAILURE_PROTOCOL_ERROR), error: '3RD_T2_TIMEOUT', pages:
0, resolution: 'unknown', transfer
On 06/26/2012 11:47 AM, Roi Stork wrote:
In what way was my question not meaningful? Not enough details?
Enoughj? You didn't give any.
Here's our current receive fax route:
sender fax machine -> telco -> E1 line -> sangoma card -> asterisk
We're currently using free fax for asterisk.
This con
In what way was my question not meaningful? Not enough details?
Here's our current receive fax route:
sender fax machine -> telco -> E1 line -> sangoma card -> asterisk
We're currently using free fax for asterisk.
I have read that fax over voip is not reliable, but is it the same
case for faxes
On 06/22/2012 11:58 AM, Roi Stork wrote:
Hi,
Im able to send faxes with no errors, but the success rate for the
receiving side is less than 50%.
Asterisk usually returns records these errors as partial fax and fax
protocol error.
A lot of the error values returned by FAXOPT are 3RD_T2_TIMEOUT
Hi,
Im able to send faxes with no errors, but the success rate for the
receiving side is less than 50%.
Asterisk usually returns records these errors as partial fax and fax
protocol error.
A lot of the error values returned by FAXOPT are 3RD_T2_TIMEOUT and T2_TIMEOUT.
Any suggestions on how to
