Hi,
Your invite is going with ulaw and alaw.
need to check that what are the entries of codecs in your sip.conf, have you
allowed there ulaw and alaw or not, and next thing is if your gateway
accepting, these codecs or not.
Keshav
laurent schweizer <[EMAIL PROTECTED]> wrote: Hello,
I have a
I have already setup a list of prefered codec , but it's only for incoming
call, not outgoing
Laurent
2007/7/17, Alex Balashov <[EMAIL PROTECTED]>:
Laurent,
You should be able to set it with the 'codec' subcommand on the outgoing
dial peer as well. 'codec g711ulaw' or similar.
-- Alex
O
Laurent,
You should be able to set it with the 'codec' subcommand on the outgoing
dial peer as well. 'codec g711ulaw' or similar.
-- Alex
On Tue, 17 Jul 2007, laurent schweizer wrote:
> Hello,
>
> I have a problem with a cisco GW, if i only set g711 ulaw or alow as codec
> in my ata the th
Hello,
I have a problem with a cisco GW, if i only set g711 ulaw or alow as codec
in my ata the the GW return a media not acceptable error.
but If i add the g729 codec the all is ok.
I see in the config of the cisco where to define codec for imcoming call but
not for outgoing
*Jul 17 15:57:02.6
