sterisk server to work i put in the ips
> of the server but it hangs up right away
>
> --
> From: da...@debsinc.com
> To: asterisk-users@lists.digium.com
> Date: Mon, 13 Jul 2009 12:57:59 -0500
>
> Subject: Re: [asterisk-users] setting up phones
>
> I assume you get
nc.com
To: asterisk-users@lists.digium.com
Date: Mon, 13 Jul 2009 12:57:59 -0500
Subject: Re: [asterisk-users] setting up phones
I assume you get a dial tone when you pick
up the handset?If you had a good phone-to-asterisk connection, debug would
show a connection or
Rose
Sent: Monday, July 13, 2009 12:49 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
added that line to the extensions.conf file because i could find a way to
add it in the GUI. I put it under the dial plan that i have selected. i just
get a busy signal i
@lists.digium.com
Date: Mon, 13 Jul 2009 12:12:16 -0500
Subject: Re: [asterisk-users] setting up phones
Most folks (AFAIK) use TFTP to connect to
the Asterisk server. I personally use HTTP, but that took a few days of
research to figure out. You’re really only using that protocol for
oun...@lists.digium.com] On Behalf Of Ott Rose
Sent: Monday, July 13, 2009 12:02 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
Ok here is what i did.
reinstalled asterisk (i used the make samples option) and asterisk-gui
in the gui i did the followi
hat the problem
is and sip set debug off does display any info like it was lastweek.
I am just trying to use the gui like you suggestd
> Date: Fri, 10 Jul 2009 14:22:25 -0700
> From: asterisk@sedwards.com
> To: asterisk-users@lists.digium.com
> Subject: Re: [asterisk-users] se
On Fri, 10 Jul 2009, Ott Rose wrote:
> I don't think the GUI is editing the conf files correctly. I am not sure
> I have configure things right. At this point i think i am going to start
> from scratch.
Yea!
--
Thanks in advance,
t: Re: [asterisk-users] setting up phones
I don't use Asterisk-GUI but the general idea of a GUI is so you don't have to
modify files by hand. You use the graphical user interface to generate the
entries you need.
If you are using a GUI then don't touch the files.
Just download EVB (E
m: da...@debsinc.com
> To: asterisk-users@lists.digium.com
> Date: Fri, 10 Jul 2009 14:46:22 -0500
>
> Subject: Re: [asterisk-users] setting up phones
>
> For now, you need these two lines in your dialplan
>
> - exten => 500,1,Dial(SIP/500,20,m)
>
> - exten =>
c.com
To: asterisk-users@lists.digium.com
Date: Fri, 10 Jul 2009 14:46:22 -0500
Subject: Re: [asterisk-users] setting up phones
For now, you need these two lines in your
dialplan
-
exten
=> 500,1,Dial(SIP/500,20,m)
-
exten
=> 501,1,Dial(SIP/501,20,m)
terisk-users-boun...@lists.digium.com] On Behalf Of Ott Rose
Sent: Friday, July 10, 2009 2:39 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
I don't see my extensions in my extensions.conf file. I see a bunch of other
stuff but nothing that looks like
s.com
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
Debug info is going to help the most here. Nobody is really going to look at
your configs.
I would also turn off lookup because if DNS fails, Asterisk doesn't care for it
much.
Try to hard code your
Debug info is going to help the most here. Nobody is really going to look
at your configs.
I would also turn off lookup because if DNS fails, Asterisk doesn't care for
it much.
Try to hard code your IPs.
Thanks,
Steve
On Fri, Jul 10, 2009 at 12:42 PM, Steve Totaro <
stot...@totarotechnologies.
no
> secret = 500
> nat = yes
> canreinvite = no
> dtmfmode = rfc2833
> insecure = no
> pickupgroup = 1
> macaddress = 00085d1095aa
> autoprov = yes
> label = 500
> linenumber = 1
> LINEKEYS = 1
> disallow = all
> allow = ulaw,gsm
>
>
>
> --
:16:50 -0400
From: stot...@first-notification.com
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
Change the address in sip.conf, not the phone.
On Fri, Jul 10, 2009 at 12:04 PM, Ott Rose wrote:
Great i changed it to my ip here is the debug and sip show
yes
From: da...@debsinc.com
To: asterisk-users@lists.digium.com
Date: Fri, 10 Jul 2009 11:20:29 -0500
Subject: Re: [asterisk-users] setting up phones
Phone 1 has 500 in all of it’s id’s and
connects to server 10.0.0.52?
From:
asterisk-users-boun...@lists.digium.com
ium.com
Date: Fri, 10 Jul 2009 10:51:18 -0500
Subject: Re: [asterisk-users] setting up phones
You are running asterisk as a local service (127.0.0.1 is localhost). You
need to use the address from ifconfig (192.168.X.X) in sip.conf (bindaddr).
This will make asterisk where your phones can "t
ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
> Supported: replaces, timer
> Contact: >
> Accept: application/sdp
> Content-Length: 0
>
>
> ------
> From: da...@debsinc.com
> To: asterisk-users@lists.digium.com
> Date: Fri, 10 Jul 200
Asterisk GUI-version : SVN-branch-2.0-r4962
Date: Fri, 10 Jul 2009 11:57:38 -0400
From: stot...@asteriskhelpdesk.com
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
I saw 127.0.0.2, never seen that before. Loopback that I have seen is
127.0.0.1.
I always
From:
asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ott Rose
Sent: Friday, July 10, 2009 10:33
AM
To:
asterisk-users@lists.digium.com
Subject: Re: [asterisk-users]
setting up phones
so i filled in the info and now i get this whe
s.digium.com] *On Behalf Of *Ott Rose
> *Sent:* Friday, July 10, 2009 10:33 AM
>
> *To:* asterisk-users@lists.digium.com
> *Subject:* Re: [asterisk-users] setting up phones
>
>
>
>
> so i filled in the info and now i get this when i run sip show peers
> Name/
digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ott Rose
Sent: Friday, July 10, 2009 10:33 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
so i filled in the info and now i get this when i run sip show peers
Name/username Host
other nic in the Asterisk box is plugged into your lan switch
the phones are plugged into the lan switch
I can ping the phones from the Asterisk server.
Date: Thu, 9 Jul 2009 17:42:43 -0400
From: stot...@asteriskhelpdesk.com
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] s
peers [Monitored: 2 online, 0 offline Unmonitored: 0 online, 0 offline]
I still cannot call the extensions and the phones say no service on there screen
From: da...@debsinc.com
To: asterisk-users@lists.digium.com
Date: Fri, 10 Jul 2009 08:40:49 -0500
Subject: Re: [asterisk-users] setting up phones
0
>
> --
> Date: Fri, 10 Jul 2009 09:42:31 -0400
>
> From: stot...@asteriskhelpdesk.com
> To: asterisk-users@lists.digium.com
> Subject: Re: [asterisk-users] setting up phones
>
> Who is the carrier? What flavor of Asterisk are you using?
>
>
replaces, timer
Expires: 120
Contact: ;expires=120
Date: Fri, 10 Jul 2009 10:53:39 GMT
Content-Length: 0
Date: Fri, 10 Jul 2009 09:42:31 -0400
From: stot...@asteriskhelpdesk.com
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
Who is the carrier? What flavor of
Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] setting up phones
Asterisk registers with the phones?
Obviously I have zero experience with these sets, but that is a new one.
Thanks,
Steve
On Fri, Jul 10, 2009 at 9:40 AM, Danny Nicholas wrote:
Let's draw
...@foobar.com/phone2
>
> defaultip=192.168.23.3
>
> mailbox=1002
>
> disallow=all
>
> allow=alaw
>
>
>
> assuming your phones are set up to contact 192.168.23.1 with username
> phone1/phone2 and proper secret, all should register and you should be good
> to go.
>
to your lan switch
>
> the phones are plugged into the lan switch
>
>
> I can ping the phones from the Asterisk server.
>
> --
> Date: Thu, 9 Jul 2009 17:42:43 -0400
> From: stot...@asteriskhelpdesk.com
> To: asterisk-users@lists.digium.com
&
.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ott Rose
Sent: Friday, July 10, 2009 8:33 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
Here is my physical network.
We have a Adtran router that is plugged into the Asterisk server a
server.
Date: Thu, 9 Jul 2009 17:42:43 -0400
From: stot...@asteriskhelpdesk.com
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] setting up phones
On Thu, Jul 9, 2009 at 5:12 PM, Ott Rose wrote:
I followed it the best I could. the phones say no service. I haven't g
te: Thu, 9 Jul 2009 16:17:07 -0500
Subject: Re: [asterisk-users] setting up phones
What do you get from “sip show peers” in
CLI? Do you have your ip address in sip.conf?
From:
asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On
On Thu, Jul 9, 2009 at 5:12 PM, Ott Rose wrote:
> I followed it the best I could. the phones say no service. I haven't got
> to setting up the SIP trunk yet I was told I could get the extensions to
> work so I could test between the two phones i have. I have to nics in my
> server. one is connec
digium.com
Subject: Re: [asterisk-users] setting up phones
I followed it the best I could. the phones say no service. I haven't got to
setting up the SIP trunk yet I was told I could get the extensions to work
so I could test between the two phones i have. I have to nics in my server.
one is
3
insecure = no
pickupgroup = 1
macaddress = 00085d1095aa
autoprov = yes
label = 500
linenumber = 1
LINEKEYS = 1
From: da...@debsinc.com
To: asterisk-users@lists.digium.com
Date: Thu, 9 Jul 2009 14:03:50 -0500
Subject: Re: [asterisk-users] setting up phones
It should be pretty simpl
law
_
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ott Rose
Sent: Thursday, July 09, 2009 1:52 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] setting up phones
Can someone tell me how to setup a Aastra 75i phone? I have b
Can someone tell me how to setup a Aastra 75i phone? I have been trying to set
it up and have pointed it to our asterisk server and selected http for
download. What is the path? I have created two extension in asterisk for
testing. I can't even get the phones to call each other.
__
37 matches
Mail list logo
