Bill Gibbs wrote:
My next step is to connect the fax machine to a Wildcard X100P.
Check to see if there is Echo cancellation in the SPA-1001, and if so
turn it off. If there is an adaptive Jitter buffer on the SPA-1001, try
changing it to a fixed one (probably no more than 40ms).
Why would
Hi all,
I was having a similar issue, using TE110P from Digium all incoming faxes
were detected and correctly received.
When trying to send outbound faxes, they all get broken... I do believe it
may be related with Echo Cancel enabled on my Zapata.conf, any ways i've set
also fax detect for
Discussion
Subject: Re: [asterisk-users] yet another faxing issue (outbound only, via ATA)
Hi all,
I was having a similar issue, using TE110P from Digium all incoming faxes
were detected and correctly received.
When trying to send outbound faxes, they all get broken... I do believe it
may
2 Asterisk servers 1.2.12.1
Connected via IAX2, same switch, GigE, no packet loss, etc
1 with a Sangoma A101 for a PRI to the PSTN
Ulaw
QoS enabled
NAT for the registered ATA boxes, no nat between the * servers
Faxing inbound:
Call from PRI hits the first Asterisk server
Then talks to