Chris Bagnall ha scritto:
What's the best way to link them up to * ? SIP or SCCP? I've trawled through
the mailing list and it seems opinion is divided on the topic, but I
understand there's been quite a lot of work on *'s SCCP module over the last
few months.
Yes, the chan_sccp (http://chan
Hi,
I have just set up 4 7960 with *, they came with V3 f/w, upgraded trough
V5 to V6 fine and they work well, very good quality and flexible feature
set. one of the best phones in my opinion. (Couldnt get V7 firmware on
though just yet)
M
On Fri, 2004-07-02 at 18:26, Chris Glover wrote:
> Hi,
>
Hi,
I have a Cisco 7960 with SIP firmware which works perfectly with
Asterisk. I did get it working using chan_sccp originally. I couldn't make
chan_skinny work. All without callmanager.
HTH
Chris
--
Chris
--
E Mail: [EMAIL PROTECTED]
SIP: [EMAIL PROTECTED]
IAXT
On Fri, 2004-07-02 at 10:45, Matt Davies | MattDavies.Net wrote:
> I have been doing so much reading on phones lately that I have completely
> lost track of some things. I seem to remember that there was one series of
> Cisco IP phones that required Cisco's call manager. Does anyone know if the
> 7
The 7960 works perfectly with Asterisk; I have them (and the 7940s)
running the SIP image with no problems whatsoever.
-Shaun
On Fri, 2 Jul 2004 08:45:44 -0600, Matt Davies | MattDavies.Net
<[EMAIL PROTECTED]> wrote:
>
> I have been doing so much reading on phones lately that I have completely
>
It'll work, either as a SIP phone with the SIP image, or as skinny using
wither chan_sccp or chan_skinny (check the wiki).
Steve
-Original Message-
From: Matt Davies | MattDavies.Net [mailto:[EMAIL PROTECTED]
Sent: 02 July 2004 15:46
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Cisco
