On Wed, 2005-07-06 at 16:27 -0300, Angel Diaz wrote:
> Hi,
> I have to connect 30 phone lines to my asterisk server, can somebody
> help on how I have to do it ?
> I have a TDM405P and one TDM400P with 4 FXO ports.
> Do I have to use 8 TDM400P ? Or, is there another way to do it ?
>
> Thanks,
I choose not to acknowledge Sangoma's existence whenever possible.
I've had some very poor experiences with the quality of their cards,
firmware, and drivers, so I tend to /not/ recommend them.
-Bryce
On Jul 6, 2005, at 16:24, TC wrote:
this would be with a couple channel banks and a quad
Bryce Chidester wrote:
Assuming you mean you have 30 analog POTS lines, the way to go about
this would be with a couple channel banks and a quad-T1 (I haven't seen
a two-port around, but that's all that is needed) card.
For the record, 30 individual analog lines is generally inefficient and
T1/PRI and/or a channel bank -- you'll find more about this if you
google this list.
> -Original Message-
> From: Angel Diaz [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, July 06, 2005 2:28 PM
> To: asterisk-users@lists.digium.com
> Subject: [Asterisk-Users] Connect 30 phone lines to aster
Angel,
The neatest way is to use an E1 to a channel bank. This splits the E1
into 30 analogue lines.
Alistair Cunningham,
Integrics Ltd,
+44 (0)7870 699 479
http://integrics.com/
Angel Diaz wrote:
Hi,
I have to connect 30 phone lines to my asterisk server, can somebody
help on how I hav
> this would be with a couple channel banks and a quad-T1 (I haven't
> seen a two-port around, but that's all that is needed) card.
not sure how hard you look :)
http://www.sangoma.com/products/p_aft-et1-specs.htm
2 T1 spans with daughter board, and an adit 600 with 4 8 port fxo cards
would fit
Angel Diaz wrote:
Hi,
I have to connect 30 phone lines to my asterisk server, can somebody
help on how I have to do it ?
I have a TDM405P and one TDM400P with 4 FXO ports.
Do I have to use 8 TDM400P ? Or, is there another way to do it ?
You buy a channel bank with FXO ports and plug it into
Assuming you mean you have 30 analog POTS lines, the way to go about
this would be with a couple channel banks and a quad-T1 (I haven't
seen a two-port around, but that's all that is needed) card.
For the record, 30 individual analog lines is generally inefficient
and would be done more clean
E1 or T1 card???
Regards,
Marc
Angel Diaz wrote:
Hi,
I have to connect 30 phone lines to my asterisk server, can somebody
help on how I have to do it ?
I have a TDM405P and one TDM400P with 4 FXO ports.
Do I have to use 8 TDM400P ? Or, is there another way to do it ?
Thanks,
Angel.