On Monday 04 Aug 2014, upendra wrote:
> Hi,
>
> i wanted to know that if i have a message indicator SIP phone , then MWI
> will work in ELASTIX ??
>
> Let me know the Details of MWI and how test it.
As long as the "message waiting" indicator can be controlled via SIP messages,
it should Just Wo
On Wed, Aug 05, 2009 at 02:13:01PM +0800, D Tucny wrote:
> The problem is that your mailbox line was below channel=1, as such, it
> applied to the next channel, channel=3 not channel=1...
> d
Nice one. Thanks for spotting that.
Mike.
signature.asc
Description: Digital signature
__
2009/8/5 Mike
> On Tue, Aug 04, 2009 at 03:35:22PM -0500, Doug Bailey wrote:
> >
> > This code is designed to handle Message Waiting Indication (MWI) incoming
> on FXO
> > line. This data could very well be embedded in your CID spill as part of
> an
> > MDMF message that also contains the caller
On Tue, Aug 04, 2009 at 03:35:22PM -0500, Doug Bailey wrote:
>
> This code is designed to handle Message Waiting Indication (MWI) incoming on
> FXO
> line. This data could very well be embedded in your CID spill as part of an
> MDMF message that also contains the caller id information. (See
>
- "Mike" wrote:
> Folks,
>
> I have recently installed Asterisk 1.6.1.1. I have two PSTN lines
> connected to a TDM400 and two VoIP lines using SIP. I have a CISCO
> 7940
> using SIP as my desk phone. Calling any of the four lines should
> ring
> the desk phone. This works fine, except
On Tue, Aug 04, 2009 at 01:37:59PM -0400, David Gibbons wrote:
> This may be a stupid question, but IS THERE a message waiting against your
> PSTN lines?
>
> -Dave
>
I don't think that there should be. One line is a BT line, provided by
my ISP from BT Wholesale. It's provided purly for ADSL an
This may be a stupid question, but IS THERE a message waiting against your PSTN
lines?
-Dave
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Mike
Sent: Tuesday, August 04, 2009 1:33 PM
To: asterisk-users@list
In the sip conf for the extension make sure you populate the mailbox
option and put in @
Ish
DHAVAL INDRODIYA wrote:
> hi all,
>
> I have Asterisk 1.6.0.5 Installed and kamailio 1.0.5 version installed
>
> when i leave voicemail On Asterisk i need MWI Indication on kamailio
> extension
>
> ther
ponse.
Thanks in advance,
Anisha
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alex
Balashov
Sent: Wednesday, April 09, 2008 11:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Message waiting indication(MWI
Rob Hillis wrote:
>>
>
> Posting the same question to the list twice doesn't help either.
Nor does cross posting it to the Dev list twice.
Doug
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."
Alex Balashov wrote:
Anisha Kumar wrote:
Please provide the required Setup / comfiguration details or redirect
to appropriate to resource.
You are decreasing your chances of getting a favourable response with an
imperative tone like that, which also suggests that you are
categorica
Anisha Kumar wrote:
> How does the Asterisk provide Voicemail Message waiting indication to
> an h323 endpoint configured with Asterisk.
I could be wrong, but a source code search of the H.323 channel drivers
turns up nothing [relevant] for the keywords "mwi," "voicemail,"
"light," "indicator,
Cavanna, Richard wrote:
> All,
>
> I am setting up asterisk on a nslu2 (Linksys) using unslug.
> Everything is working great except that I have a polycom 301 and I
> cannot get the message indicator to work. I have created the users and
> mailbox in users.conf and I can manually dial the mail
Hi
For those interested.
I've ported the following solution:
http://bugs.digium.com/view.php?id=4236
for asterisk 1.2.10
it works well.
To activate MWI over IAX2 add the following line in sip.conf or
zaptel.conf etc...
mailbox=IAX2/{iax2_context}/[EMAIL PROTECTED]
For some weird reason though,
Hi
On 7/27/06, Luki <[EMAIL PROTECTED]> wrote:
There is this old patch that does remote MWI over IAX (among other
things). I used it on earlier versions and it worked quite nicely.
This was before 1.2 so it may no longer work at all. At the very least
it will likely required some updating. Doabl
Hi
On 7/27/06, Luki <[EMAIL PROTECTED]> wrote:
There is this old patch that does remote MWI over IAX (among other
things). I used it on earlier versions and it worked quite nicely.
This was before 1.2 so it may no longer work at all. At the very least
it will likely required some updating. Doab
Hi
On 7/27/06, Joshua Colp <[EMAIL PROTECTED]> wrote:
I don't believe there's anything configurable but if you open app_voicemail.c
there's two declarations, VOICEMAIL_DIR_MODE and VOICEMAIL_FILE_MODE which set
the permissions. DIR mode is at 0770 right now and FILE mode is at 0660.
Hum.. We
- Original Message -
From: Jean-Yves Avenard
[mailto:[EMAIL PROTECTED]
To: Asterisk Users Mailing List -
Non-Commercial Discussion [mailto:[EMAIL PROTECTED]
Sent:
Thu, 27 Jul 2006 02:07:56 -0300
Subject: Re: [asterisk-users] Message
waiting question...
> Hi
>
>
> On 7/2
Anyhow, Asterisk1 and Asterisk2 are connected using IAX2.
What I would like is to have the SPA3000 Message Waiting indicator
based on the voicemail message hosted on the Asterisk2 server.
There is this old patch that does remote MWI over IAX (among other
things). I used it on earlier versions an
Hi
On 7/27/06, Joshua Colp <[EMAIL PROTECTED]> wrote:
chan_sip requests the count fairly frequently, dunno how much traffic it would
actually generate though.
Well I took the very easy route.
Every minute I do a rsync between server2 and server1 of the INBOX
directory I want to check. I als
- Original Message -
From: Jean-Yves Avenard
[mailto:[EMAIL PROTECTED]
To: Asterisk Users Mailing List -
Non-Commercial Discussion [mailto:[EMAIL PROTECTED]
Sent:
Wed, 26 Jul 2006 22:23:01 -0300
Subject: Re: [asterisk-users] Message
waiting question...
>
> > 1. Using ODBC s
Hi.
Thank you so much for answering. I guess I couldn't get a better
qualified answer !
On 7/27/06, Joshua Colp <[EMAIL PROTECTED]> wrote:
Anything is possible, it's just to what extreme do you want to go to make it
happen. Right now we have no way of transporting arbitrary information (like
Might be easier to share the directory over WebDAV. Only need to have one port open on the work firewall (if in place) to allow access and can also run it over SSL.-brandonOn 7/26/06,
Joshua Colp <[EMAIL PROTECTED]> wrote:
- Original Message -From: Jean-Yves Avenard[mailto:[EMAIL PROTECTED
- Original Message -
From: Jean-Yves Avenard
[mailto:[EMAIL PROTECTED]
To: Asterisk Users Mailing List -
Non-Commercial Discussion [mailto:[EMAIL PROTECTED]
Sent:
Wed, 26 Jul 2006 11:19:34 -0300
Subject: [asterisk-users] Message waiting
question...
> Hi
Hola!
> I have the following setu
ber 15, 2005 12:41 PM
Subject: RE: [Asterisk-Users] Message waiting notification
On my phones (polycom's) it's an option in the configuration to change the
tone, etc.
-Jonathan
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sixto Diaz
Sent: Tuesday, November 15, 2
Subject: Re: [Asterisk-Users]
Message waiting notification
i want to ring the phone user or change the
tone is this posible with mailbox= ?
- Original Message -
From: Jonathan k.
Creasy
To: Asterisk Users Mailing List -
Non-Commercial Discussion
-Users] Message
waiting notification
mailbox= in the
sip.conf
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sixto DiazSent: Tuesday, November 15, 2005 9:33
AMTo: asterisk-users@lists.digium.comSubject: [Asterisk-Users] Message waiting
mailbox= in the sip.conf
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sixto Diaz
Sent: Tuesday, November 15, 2005
9:33 AM
To:
asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Message
waiting notification
Hi i want to notify a user that he has a
On Oct 27, 2005, at 8:04 AM, Mustafa N. Deeb wrote:
I have a pri connection working on asterisk; I would like to send the
MWI on the PRI link
Libpri code clearly says that it is there, but there is no document in
asterisk says anything about this.
The current mailbox config also doesn’t w
My message waiting isn't ever clearing.
You're using a SIP phone. So it sounds like Asterisk is signalling
that correctly.
Mine are analog devices connected through a Sipura-3000. Sounds like
the problem is related to the Sipura not Asterisk. Thanks for the
feedback.
- |Daryll
__
--On Thursday, October 21, 2004 10:34 -0700 Daryll Strauss
<[EMAIL PROTECTED]> wrote:
So it looks like Asterisk isn't clearing the message waiting light.
That would explain why your GrandStream is flashing as well.
We haven't had any problems yet but I have noticed it takes 10-20 seconds
or so
I've noticed a similar problem. I've got an inline caller-id box that
shows message waiting and an analog phone that shows the number of new
and old messages. They both continue to show message waiting even
after I've listened to and deleted the messages.
So it looks like Asterisk isn't clearing t
Don,
I have the same situation at home. I have a shared mailbox (500), and each of
my other two SIP phones have their own. I wanted the MWI to light up for
either the individual or shared mailbox. I didn't want to use broadcasting,
since I wanted the message to "clear" when either of us listened to
use 1 of the broadcast mail patches on bugs.digium.com so when a msg
for a shared box comes in it is copied to all the priv boxes
associated w/ that group so the mwi on all those phones goes on as
well
On Sat, 07 Aug 2004 13:32:30 -0400, Don Hughes
<[EMAIL PROTECTED]> wrote:
> The message waiting
Rana Dutt a écrit :
I cannot get the Message Waiting Light (MWL) on my Grandstream phone to turn
on when I leave a new voice mail message for that phone. I have specified
the correct mailbox in my sip.conf as follows:
[200]
type=friend
username=200
host=dynamic
context=dialout
callerid=200
dtmfmode
E.
Johansson
Sent: Thursday, February 26, 2004 4:12 AM
To: [EMAIL PROTECTED]
Subject:Re: [Asterisk-Users] Message waiting light not coming on
Iain Stevenson wrote:
>
> Works perfectly fine for me - but I'm not using rfc2683 - my Grandstream
> uses the latest firmwar
Iain Stevenson wrote:
Works perfectly fine for me - but I'm not using rfc2683 - my Grandstream
uses the latest firmware and SIP INFO.
Iain
--On Thursday, February 26, 2004 12:55 am -0500 Rana Dutt
<[EMAIL PROTECTED]> wrote:
I cannot get the Message Waiting Light (MWL) on my Grandstream phone
Works perfectly fine for me - but I'm not using rfc2683 - my Grandstream
uses the latest firmware and SIP INFO.
Iain
--On Thursday, February 26, 2004 12:55 am -0500 Rana Dutt <[EMAIL PROTECTED]>
wrote:
I cannot get the Message Waiting Light (MWL) on my Grandstream phone to
turn on when I leav
> Does this mean that if the sip entry comes out to [EMAIL PROTECTED], is that
what I put in for the subscribe and callback? I don't understand the connection
between the SUBSCRIBE feature and the NOTIFY
>
> Anyone with Polycom experience with MWI?
>
> I will have to check to see if the NOTIF
ll have to check to see if the NOTIFY is even happening...
Sean
-Original Message-
From: Rich Adamson [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 06, 2004 6:22 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Message waiting indicator
> What is required to get the mwi to work
> What is required to get the mwi to work? Is it more of a phone subject
> or *? I have the mailbox= line in sip.conf, but only one extension is
> named, and in some of the examples, I have seen that there are two...
> What is that all about and how does it affect the extensions.conf and
> voicem
No takers? Should I submit a bug report then? I didn't find any open
bugs on stuck
MWI.
Clif Jones wrote:
I have had several cases where the message waiting indicator was stuck
in the on state
with Cisco 7960 SIP phones. Here are the two cases:
1. Single extension that mapped to a single voi
Page through this thread...
http://lists.digium.com/pipermail/asterisk-users/2003-November/027220.html
This was discussed just a few days ago.
-
Andrew Thompson
- Original Message -
From: "Thorsten Neumann" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, November 17, 2003
On Mon, 2003-10-06 at 23:05, Brian West wrote:
> > use
> > mailbox=500
> >
> > instead of [EMAIL PROTECTED]
>
> [EMAIL PROTECTED]
Thanks guys, changing "voicemail" by "mailbox" did the trick !
--
Juanjo sin .sig
___
Asterisk-Users mailing lis
Jaun,
In your sip.conf try changing the [EMAIL PROTECTED] to [EMAIL PROTECTED]
My MWI works rock solid now almost instantaneously coming on and off.
Babak
Juan J. Sierralta P. wrote:
> On Fri, 2003-10-03 at 14:53, Babak Pasdar wrote:
> > This issue was resolved by adding the @context in the vo
Use in your sip.conf:
[EMAIL PROTECTED]
You need to use a the @context with voicemail2
Kevin,
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Juan J.
Sierralta P.
Sent: Monday, October 06, 2003 6:58 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Mess
> use
> mailbox=500
>
> instead of [EMAIL PROTECTED]
[EMAIL PROTECTED]
since he doesn't have his stuff in the default context
bkw
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
> --- sip.conf
>
> [8991]
> type=friend
> username=8991
> secret=
> nat=no ; This phone may be natted
> host=dynamic
> canreinvite=no ; Cisco poops on reinvite sometimes
> qualify=500 ; Qualify peer is no more than
This issue was resolved by adding the @context in the voicemail.conf
file for the extension to the mailbox=XXX command.
[EMAIL PROTECTED]
Thanks so much for your help.
Babak
On Fri, 2003-10-03 at 14:43, Babak Pasdar wrote:
> Jared,
>
> Thanks for the response. I have tried
>
> [EMAIL PROTEC
Jared,
Thanks for the response. I have tried
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
none of these worked for me.
I have enclosed part of my entensions.conf as well as my voicemail.conf
Hopefully this will provide pertinent information.
Again thanks for your help.
Bbaak
---
I think you need [EMAIL PROTECTED], where voicemailcontext is
your voice mail context. (I'm assuming you're using VoiceMail2.)
Hope that helps...
Jared Smith
On Fri, 2003-10-03 at 12:01, Babak Pasdar wrote:
> I have a cisco 7940 with the following sip.conf config:
>
> [Desk1.1]
> type=friend
>
On Tue, 2 Sep 2003, John Todd wrote:
>I'm trying to make the MWI indicators on my client's Vodavi Starplus
>DHS phones work. The actual signalling - in-band DTMF from the ZAP
>interfaces directly to the PBX system - works fine. I can manually
>tell asterisk to send "#9610" as DTMF and voila, t
On Tue, 2 Sep 2003, John Todd wrote:
> >I'm trying to make the MWI indicators on my client's Vodavi Starplus
> >DHS phones work. The actual signalling - in-band DTMF from the ZAP
> >interfaces directly to the PBX system - works fine. I can manually
> >tell asterisk to send "#9610" as DTMF and
I'm trying to make the MWI indicators on my client's Vodavi Starplus
DHS phones work. The actual signalling - in-band DTMF from the ZAP
interfaces directly to the PBX system - works fine. I can manually
tell asterisk to send "#9610" as DTMF and voila, the MWI on
extension 10 lights (or goes out
l Message -
> From: "Benjamin Miller" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, February 28, 2003 10:13 AM
> Subject: RE: [Asterisk-Users] Message waiting light on Cisco 7960
>
>
> > Just put a mailbox=XX in as part of the phone's defin
February 28, 2003 10:13 AM
> Subject: RE: [Asterisk-Users] Message waiting light on Cisco 7960
>
>
> > Just put a mailbox=XX in as part of the phone's definition in sip.conf
> where XX is the voicemail box number for that phone.
> >
> > -Original Message--
Will that work in the zapata.conf file also for phones that support MWI?
- Original Message -
From: "Benjamin Miller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 28, 2003 10:13 AM
Subject: RE: [Asterisk-Users] Message waiting light on Cis
Just put a mailbox=XX in as part of the phone's definition in sip.conf where XX is the
voicemail box number for that phone.
-Original Message-
From: Lenny Tropiano / asterisk.org Mailing list
[mailto:[EMAIL PROTECTED]
Sent: Thursday, February 27, 2003 11:28 PM
To: [EMAIL PROTECTED]
Subjec
58 matches
Mail list logo
