On Wed, 2005-02-23 at 01:52, Mark Eissler wrote:
> On Feb 21, 2005, at 7:35 PM, Rudolf Ladyzhenskii wrote:
>
> > Hi, all
> >
> > I am doing "prrof of concept" system. I will have two IP phones
> > connected to Asterisk box. Box itself will have 1 PSTN conenction and
> > one analog phone conencti
On Feb 21, 2005, at 7:35 PM, Rudolf Ladyzhenskii wrote:
Hi, all
I am doing "prrof of concept" system. I will have two IP phones
connected to Asterisk box. Box itself will have 1 PSTN conenction and
one analog phone conenction. A basic minimal configuration.
At the moment I am planning to use an
ROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
Sent: Tuesday, February 22, 2005 5:03 AM
Subject: RE: [Asterisk-Users] Minimal hardware
requirements
> We did our proof on concept on a celeron 600 - which
was fine to run 2
> software and 2 hardware
February 2005 2:03 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Minimal hardware requirements
>
> We did our proof on concept on a celeron 600 - which was fine to run 2
> software and 2 hardware phones off.
>
> O
rcial Discussion'
Subject: RE: [Asterisk-Users] Minimal hardware requirements
We did our proof on concept on a celeron 600 - which was fine to run 2 software
and 2 hardware phones off.
Original testing was with sjphone and xlite. (software phones)
We didn't fit a TDM card until we set u
We did our proof on concept on a celeron 600 - which was fine to run 2 software
and 2 hardware phones off.
Original testing was with sjphone and xlite. (software phones)
We didn't fit a TDM card until we set up our first box, which was a dual
p3-1000.
Later,
PaulH
-Original Message-
Rudolf Ladyzhenskii wrote:
Hi, all
I am doing "prrof of concept" system. I will have two IP phones connected to
Asterisk box. Box itself will have 1 PSTN conenction and one analog phone conenction. A
basic minimal configuration.
At the moment I am planning to use an old PII-350 with 128M of RAM I
I have two comments:
a. It maybe doesn't work because of the PCI specifications the box support.
If was manufactured before Jan 2000, it is quite probably that it won't
recognize the Digium cards.
b. From the point of view of load, I see no problems, I think the specs of
the machine are enough for
.
Rudolf
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Novack
( Mozilla - portable )
Sent: Tuesday, February 22, 2005 11:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Minimal hardware requirements
Rudolf
On Tue, 2005-02-22 at 11:41, John Novack ( Mozilla - portable ) wrote:
> Rudolf Ladyzhenskii wrote:
>
> >Hi, all
> >
> >I am doing "prrof of concept" system. I will have two IP phones connected to
> >Asterisk box. Box itself will have 1 PSTN conenction and one analog phone
> >conenction. A basic
Rudolf Ladyzhenskii wrote:
Hi, all
I am doing "prrof of concept" system. I will have two IP phones connected to
Asterisk box. Box itself will have 1 PSTN conenction and one analog phone conenction. A
basic minimal configuration.
At the moment I am planning to use an old PII-350 with 128M of RAM I
11 matches
Mail list logo