Try PRI debug span 1 and see if that sheds any light on the problem.
Thanks,
Steve
Hello,
Iam trying to configure asterisk with a PRI E1 line. I got to a point
where incoming calls on PRI is landing on asterisk and asterisk
immediately starts throwing the below errors on the console. The
Look on mantis for some patch to do hdlc in hardware, it might help.
Zoa
Steve Totaro wrote:
Try PRI debug span 1 and see if that sheds any light on the problem.
Thanks,
Steve
Hello,
Iam trying to configure asterisk with a PRI E1 line. I got to a point
where incoming calls on PRI is
Hey,
Thanks for the suggestion. I did but couldnt understand any of it. Here
is the link if anyone wants to try.
http://pastebin.ca/33394
Iam trying the suggested hardware hdlc patch. Will keep you guys posted.
dushyanth
Try PRI debug span 1 and see if that sheds any light on the problem.
Hello,
Iam not sure whether this patch will work for TE110P as the module i
load is wcte11xp and the patches specified at
(http://bugs.digium.com/view.php?id=5313) seems to patch the file
wct4xxp.c in zaptel.
Can anyone please confirm ? Or Wat the heck shuld i just go ahead and try ?
Dushyanth
Hello all,
The errors was due to incorrect coding/framing specified on zaptel.conf.
The below settings worked.
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
BTW, digium support confirmed that the hardward hdlc patch wont work in
this case and it is for doing data over the ports.
Thanks