I found the problem, finally. Or perhaps better put, I found a way to
make it work. I'm sending to list in case someone else finds
him/herself in the same spot someday.
It turns out that the sip.conf context name and the registration
username must be the same.
Once I had done that
I found the problem, finally. Or perhaps better put, I found a way to
make it work. I'm sending to list in case someone else finds
him/herself in the same spot someday.
It turns out that the sip.conf context name and the registration
username must be the same.
Once I had done that for
Brian Capouch wrote:
I'm wondering if there's anyone out there who has successfully gotten an
SPA-3000 to register, as its documentation would indicate, on both ports
5060 (for standard client FXS service) and 5061 (for the purpose of
originating calls via SIP from the PSTN interface on the
Brian Capouch wrote:
I'm wondering if there's anyone out there who has successfully gotten an
SPA-3000 to register, as its documentation would indicate, on both ports
5060 (for standard client FXS service) and 5061 (for the purpose of
originating calls via SIP from the PSTN interface on the
Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SPA-3000: Dual Registrations?
Brian Capouch wrote:
I'm wondering if there's anyone out there who has successfully gotten
an SPA-3000 to register, as its documentation would indicate, on both
ports 5060 (for standard
://voipspeak.net
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Rich Adamson
Sent: Tuesday, December 13, 2005 5:04 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SPA-3000: Dual Registrations?
Brian Capouch wrote
Kerry Garrison wrote:
We just posted an updated guide to the SPA-3000 a few days ago. The example
uses AMP but all the settings are there:
It was exactly that example that I was using to start with.
Using the setup just as below, I get the following error:
chan_sip.c:10823