--Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Aaron Clauson
> Sent: 24 November 2005 03:07
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Satellite, SIP Invite 488 Codec
> R
ason p [mailto:[EMAIL PROTECTED]
> Sent: 24 November 2005 02:25
> To: [EMAIL PROTECTED]; Asterisk Users Mailing List -
> Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Satellite, SIP Invite 488 Codec
> Rejection, SIP Timing Issue??
>
> I had the same problem wh
Trust me this is on the ATA. set both lines to use 729 but dont fource
them to only use that codec (in the ata config) I spent days trying to
figure this out the first time i ran accross it, and after that config
change on the ata i haven't had problems. I have seen this on most of
the sipura's tha
I had the same problem when we were setting up these boxes after
katrina. What i found is that they will only do one G729 session at a
time. so that mesg that your showing is that its trying to
register two chans as 729. what i did to get around this was to
turn off fource prefered codec on one li
Aaron Clauson wrote:
m=audio 16450 RTP/AVP 0 2 4 8 18 96 97 98 100 101
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729a/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:100 NSE/8000
I don't know wha
