In fact, with EWSD V13 you can't remove CRC4 in PRI mode.
Regards,
Gus
- Original Message -
From: "Storer, Darren" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 07, 2004 8:32 PM
Subject: RE: [Asterisk-Users] Siemens EWSD 13
>
Hi,
I had exactly the same symptoms today with a co-located * connected to a
Public Switch here in the UK. The problem was solved by insisting that the
Telco turned on CRC4 at their end and then, after an 'init 6', layer two
settled down on both systems.
I was taught that if you are connecting to
Hi,
If you didnt do it yet I'd suggest you start with simpliest thing which is
making loop on the cables. And testing the status. Simple RJ45 plug with
10cm of 2 pairs of cable crimped by 1,2 on 4,5.
When you make loop T410P goes green. EWSD also will see a loop.
Check cables and loops and when yo