I will reply to my own question in a case the answer is of use to others. I rebooted my Asterisk server and now it seems to work OK again. I suspect that after a while the zaphfc BRI interface has problems and needs a reboot. I have seen different problems like this, i.e. problems that occur over time especially with answering calls, with the zaphfc drivers before.
A reboot usually cures it for a while, but it would be great if such a thing wasn't needed. -----Original Message----- From: [EMAIL PROTECTED] on behalf of Rob Scott Sent: Wed 3/23/2005 7:39 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Zaphfc + PRI card problem I have the latest bristuff, a zaphfc card for external calls and a PRI card for connecting to a PBX as a channel bank. With a BRI I would expect to be able to have two incoming calls going at the same time, but when I try it, one call connects and the other gives the following console message, a busy tone, and then a hangup: Mar 23 19:18:35 WARNING[5595]: chan_zap.c:7512 zt_pri_error: PRI: received SETUP message for call that is not a new call, wicked!!! Mar 23 19:18:37 WARNING[5595]: chan_zap.c:7512 zt_pri_error: PRI: received SETUP message for call that is not a new call, wicked!!! -- Channel 0/2, span 1 got hangup Anyone know what this means? I guess I should be able to have two simultaneous incoming calls over a BRI card, no? _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
<<winmail.dat>>
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users