Hi,
we use the oh323 driver (see the post from Joao for installationhttp://www.archivum.info/asterisk-users@lists.digium.com/2005-01/msg00931.html).
in the oh323.conf
[general]
listenPort= 192.x.x.x /the ip @ of the HG3550
fastStart=yes /*enable fast start
context=voip-h323
codec=G711A
in the
i agree... no H.323 support for endpoint (HG3530) but you still have h.323 (for
the moment only version 2.0)
support for ip-trunking (HG3550).
So what if you have the following setup.
[OPTIPOINT400_HFA]--[HIPAT4K][oh.323][ASTERISK]--[OPTIPOINT400_SIP].
how can i configure ip-trunking from
Hello,
Am i right when i suppose that the chan_cornet will replace the oh.323.
[OPTIPOINT400_HFA]--[HIPAT4K][chan_cornet][ASTERISK]--[OPTIPOINT400_SIP].
Yes, that's the idea. Let's look if we have success :)
cu,
Steffen
___
Hi,
i agree... no H.323 support for endpoint (HG3530) but you still have h.323 (for the moment only version 2.0)support for ip-trunking (HG3550).
So what if you have the following setup.
[OPTIPOINT400_HFA]--[HIPAT4K][oh.323][ASTERISK]--[OPTIPOINT400_SIP].
Am i right when i suppose that
GIBERT Frédéric [EMAIL PROTECTED] wrote:
STLS4 is a 4 BRI ports card to connect to carrier.
STMD8 is a card to connect 8 ISDN Siemens phones (optiset)
STMD8 is not a board for Optisets. You have to use a SLMO/SLU board to register an Optiset/Optipoint500.
Do you Yahoo!?
The all-new My Yahoo!
Hi,
The HG1500 is a HiPath3000 board and i don't have experience with Asterisk and HiPath3K.
What we have is an Asterisk connected to a Siemens HiPath4000 over a H.323 trunk using oh323 and the HG3550 board. It works fine. But the Siemens HG3550 only supports H.323 V2.0 (so not a lot of features
solutions?
Joao
- Original Message -
From:
richard
Coco
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Wednesday, January 05, 2005 12:13
PM
Subject: Re: [Asterisk-Users] chan_cornet
Hi,
The HG1500 is a HiPath3000 board and i don't
... but not yet a direct Asterisk-HiPath connection.
But doesnt Digium have Asterisk-HiPath solutions?
Joao
- Original Message -
From: richard Coco
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Wednesday, January 05, 2005 12:13 PM
Subject: Re: [Asterisk-Users
Hello Steffen,
hey it sounds very good...!!! but what do you mean with *new hipath version doesn't support H.323 anymore*? What version are you talking about? As far as i know the new version of HiPath4000 V2.0 still supports H.323 (STMI2).Steffen Koepf [EMAIL PROTECTED] wrote:
Hello, I dont know
Hello,
but what do you mean with *new hipath version doesn't
support H.323 anymore*? What version are you talking about?
As far as i know the new version of HiPath4000 V2.0 still
supports H.323 (STMI2).
HiPath 3000 - H.323 Support
HiPath 4000 - NO H.323 Support and nothing else but cornet
-
Non-Commercial Discussion
Sent: Wednesday, January 05, 2005 1:38
PM
Subject: Re: [Asterisk-Users] chan_cornet
What do you mean with *But doesnt Digium have
Asterisk-HiPath solutions?*. If you are meaning a connection with Digium cards
so...sorry i've never usedDigium cards
:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]De la part de Joao
PereiraEnvoyé: mercredi 5 janvier 2005
17:23À: Asterisk Users Mailing List - Non-Commercial
DiscussionObjet: Re: [Asterisk-Users] chan_cornet
Hi
Yes, Im looking a way to connect Asterisk to HG.
I have already oh323
12 matches
Mail list logo
