Please forgive the (almost?) OT post. (and the fact that I need a clue-bat)
We've got a situation at one of our sites where a construction crew is
likely to dig up our conduit which houses some data fiber and one pair
of fiber used to tie a Definity 3gsi at a small office building to the
Thanks for your reply.
I wouldn't expect more than half a dozen concurrent calls. Also, we can do the
bridge with proxims if needed (not the model with a telco t1 broken out).
The reason I ask about the media converters is to save the trouble having to
interface an * box to each Definity.
Rich
Thanks for the reply.
I'll get up there today and get more details on the Definity.
Alexander Lopez wrote:
We use Wireless b/w two office in Miami We are using the Proxim stuff
and it is solid. Two Asterisk servers doing Iax b/w them should (will)
work fine. What is the interface into the
Check this out:
http://www.engagecom.com/Products/iptube_T1.htm
On 6/1/05, Rich Adamson [EMAIL PROTECTED] wrote:
Please forgive the (almost?) OT post. (and the fact that I need a clue-bat)
We've got a situation at one of our sites where a construction crew is
likely to dig up our
Thanks (all) for your help. We've decided to run a few pair of fiber
over a different route instead of trying to do this wirelessly.
Thanks again for your input!
Bill Ford wrote:
Check this out:
http://www.engagecom.com/Products/iptube_T1.htm
On 6/1/05, Rich Adamson [EMAIL PROTECTED]
We use Wireless b/w two office in Miami We are using the Proxim stuff
and it is solid. Two Asterisk servers doing Iax b/w them should (will)
work fine. What is the interface into the 3gsi?? Do you have a card
part number to post, that would help in determining what you need to do.
Alex