If "something" changed on its own 6 hours ago (i.e. you didn't touch Asterisk or its config), then look beyond Asterisk. Did you do a hard reboot yet? Memory check? Reseat PCI cards and memory? Check power supply? New drivers/software loaded? (Did YUM run in the background?)
If everything else looks stable, load modules one at a time (change sequence) etc. MD -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chris Bagnall Sent: Monday, March 26, 2007 5:18 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Emergency chan_sip issue Greetings list, Wondering if some kind soul can help me with an issue with chan_sip segfaulting as soon as it loads... Basically, if sip.conf contains any peers with "host=dynamic" in them, asterisk won't start. Doing -vvvdddc yields the following: [chan_sip.so] => (Session Initiation Protocol (SIP)) == Parsing '/etc/asterisk/sip.conf': Found Segmentation fault As soon as I remove the host=dynamic lines from sip.conf, asterisk starts fine, the Zap and IAX channels work, but of course, no SIP phones can register. This box was working perfectly up until about 6 hours ago when it was restarted. Any thoughts/suggestions gratefully appreciated. Regards, Chris -- C.M. Bagnall, Director, Minotaur I.T. Limited For full contact details visit http://www.minotaur.it/chris.html This email is made from 100% recycled electrons _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users