ng.
>
> Cleve Jansen
>
>
>
> -Original Message-
> From: Martin Rogers [mailto:fromastlinux-us...@mhr.me.uk]
> Sent: Sunday, 1 March 2009 10:44 PM
> To: AstLinux Users Mailing List
> Subject: Re: [Astlinux-users] Astlinux 0.6.3 Some strange issues please hel
Message-
From: Martin Rogers [mailto:fromastlinux-us...@mhr.me.uk]
Sent: Sunday, 1 March 2009 10:44 PM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Astlinux 0.6.3 Some strange issues please help
Not that this affect the operation, but
callerid="PSTN Line Two"
should be
c
our TDM card goes , have you set the ZAPMODS variable in
>> /mnt/kd/rc.conf ? Have you setup the configuration the card for the
>> (assuming you are using ZAP rather than DAHDI) in /mnt/kd/zapatel.conf
>> and /mnt/kd/asterisk/zapata.conf.]
>>
>> I am a bit lost here as I h
sk/zapata.conf.]
>
> I am a bit lost here as I have not setup anything here, could you please
> give me assist me what exactly I should be doing here.
>
> Cheers
>
> Cleve
>
> -Original Message-----
> From: Martin Rogers [mailto:fromastlinux-us...@mhr.me.uk]
> Sent: S
oing here.
Cheers
Cleve
-Original Message-
From: Martin Rogers [mailto:fromastlinux-us...@mhr.me.uk]
Sent: Sunday, 1 March 2009 8:51 PM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Astlinux 0.6.3 Some strange issues please help
Hi Cleve
When you are trying to login,
Hi Cleve
When you are trying to login, which account and password are you using.
The default root password after a clean installation is "astlinux".
As far as your TDM card goes , have you set the ZAPMODS variable in
/mnt/kd/rc.conf ? Have you setup the configuration the card for the
(assuming yo
Hi All,
I finally took the plunge and installed the net5501 img onto a 1 GB CF,
which runs on an Alix1c board I have experience the following.
When I try to run create UnionFS I with the following method.
pbx ~ # fdisk /dev/hda
The number of cylinders for this disk is set to 1986.
