David, Lonnie, and everyone else,
Thanks for your help. I think there was something flawed with Astlinux
install because it kept magically jumping between versions 1.4 and 1.8.
I eventually gave up on the GTalk approach and was able to successfully
connect to the PSTN with Teliax. Maybe one
Ken,
I don't see anything wrong. Have you tried to debug it? If I were you I
would go into the asterisk console and turn on Verbose and Debug and see
where the problem is. You can do this from the AstLinux GUI at the CLI tab
(or better - ssh in from a command line). Login as root, then type
"
Does anyone have an idea why my outgoing calls will not work with the
script below? I have not been able to make any headway with this.
Thank you.
On Tue, Dec 4, 2012 at 10:06 PM, Ken Fischer
wrote:
> I'm hoping someone here might be able to help me.
>
> I'm working on configuring astlinux for a
David,
Thanks. I tried the tip but it didn't help. Below is my
extensions.conf file. Do you see anything off?I think my
voicemail problem is something different, since I am successfully
leaving voicemails. I think my real problem is that I'm not getting
any audio back, since my conference
Note that on inbound calls from GTalk you need to send a DTMF tone '1' to
tell google to connect the call. My dialplan is fairly complex but see
snips below for how I handle this.
I don't know if this will help with your audio problem though.
David
DID_gtalk]
exten = s,1,Set(crazygooglecid=${C
Also..my voicemail stopped working. When I call a line it rings and then
when I hit unavail status it seems to transfer me but I hear nothing on the
line. When I go to the Astlinux voicemail tab though it shows that I did in
fact leave a voicemail.
Not sure if this problem is related or not. It st
Also..my voicemail stopped working. When I call a line it rings and then
when I hit unavail status it seems to transfer me but I hear nothing on the
line. When I go to the Astlinux voicemail tab though it shows that I did in
fact leave a voicemail.
Not sure if this problem is related to my other o
Everyone,
The changes are made and now I am running version 1.8. I now see that
I am connected in the Jabber status and I can use the phone to make
outgoing calls. However, I have the following problems:
1. Incoming calls do not work.
2. During outgoing calls, the voice does not transmit from
Ken,
I assume this is on a Compact Flash card or such, be sure to "zero out" the
drive before re-installing the new image, otherwise the previous ext2
partition(s) will reincarnate themselves.
Lonnie
On Dec 5, 2012, at 11:28 AM, Ken Fischer wrote:
> ThanksI will get to work on that. The
ThanksI will get to work on that. The Astlinux box was setup by my
professor and is in his office so I will need to coordinate with him. It
might be a few days until I can test again and let you know the results.
Thank you.
On Dec 5, 2012 10:52 AM, "Lonnie Abelbeck"
wrote:
> Ken,
>
> As Micha
Ken,
As Michael noted (below) you are running an old version of Asterisk (1.4.44)
which I seem to recall has issues with GTalk.
I'd suggest using AstLinux 1.0.5 (as you are) but with Asterisk 1.8.x.
Using this Link:
http://www.astlinux.org/release/105-asterisk-18160
Download the "astlinux-1.0.
Am 05.12.2012 um 13:40 schrieb Ken Fischer:
> Thank you for your response... much appreciated. I added them to the modules
> configuration so I think they are loaded. Is there some other way to check? I
> am using Astlinux version 1.8.
>
> On Dec 5, 2012 6:42 AM, "Michael Keuter" wrote:
>
>
Thank you for your response... much appreciated. I added them to the
modules configuration so I think they are loaded. Is there some other way
to check? I am using Astlinux version 1.8.
On Dec 5, 2012 6:42 AM, "Michael Keuter" wrote:
>
> Am 05.12.2012 um 04:06 schrieb Ken Fischer:
>
> > I'm hopin
Am 05.12.2012 um 04:06 schrieb Ken Fischer:
> I'm hoping someone here might be able to help me.
>
> I'm working on configuring astlinux for a school project and I'm
> having some trouble with GTalk integration. My configuration is
> below. I signed up for the astlinux mailing list just so you
I'm hoping someone here might be able to help me.
I'm working on configuring astlinux for a school project and I'm
having some trouble with GTalk integration. My configuration is
below. I signed up for the astlinux mailing list just so you know and
am waiting to hear back. I can't make outgoin
15 matches
Mail list logo
