your hostapd config does not contain the bridge. beside this i wont see
much details about your network configuration.
the hostapd log shows the the client is leaving by itself. (local
reason). so the ap is working.
so check if your dhcp server is configured properly and fix yôur hostapd
confi
Am 09.11.2017 um 16:54 schrieb Andy Finkel:
I'm trying to get an ath10k QCA9887 based radio working with WDS
stations. Does anyone know if firmware-5.bin_10.2.4-1.0-00029
supports WDS ?
The driver works fine using the QCA9887 card as an AP;
The same driver, running a QCA9882 based radio card
Hi:
Currently i am using latest backport git and linux-stable git tag
v4.13 to backport to my old linux4.2.8.
I am successfully enable the ap mode(with hostapd). Then i bridge(by
command brctl) the ap with wired port and i test connectivity with my
cell phone and laptop.
But unfortunately it stop
Rajkumar Manoharan writes:
> Agree.. Even I am not fan of that patch in ath10k. IIRC Michal pushed
> this change as temp one and planned to revert it once it is fixed in
> stack or in driver.
>
> I thought Eric change in fq_codel is meant only for fatty udp flows.
> Forgive my ignorance.
It is,
> >
> > The issue that seems to point to has been fixed a while ago; I'll send
> > and updated patch with a better commit message (also forgot to cc the
> > ath10k list, I see).
> >
> > -Toke
>
> Hmm. I remember that thread. I thought we'd basically resolved that issue (45%
> of the time spent in
Adding ath10k list to get this discussion to the list archive.
Dave Taht writes:
> On Thu, Nov 9, 2017 at 4:10 PM, Toke Høiland-Jørgensen wrote:
>> Rajkumar Manoharan writes:
>>
Commit 4ca1807815aa6801aaced7fdefa9edacc2521767 disables the use of the
mac80211 TXQs for some devices bec
Commit 4ca1807815aa6801aaced7fdefa9edacc2521767 disables the use of the
mac80211 TXQs for some devices because of a theoretical throughput
regression. The original regression report[1] was related to fq_codel
qdisc drop performance, which was fixed in
9d18562a227874289fda8ca5d117d8f503f1dcca. Since
While poking around in the firmware, I noticed what appears to be
an ath10k driver issue, which came in with this commit below.
commit 01d6fd6965eaf8d4b3aab681d30e77c53a834162
Author: Erik Stromdahl
Date: Wed Apr 26 12:17:55 2017 +0300
ath10k: various sdio related definitions
Debug m
I'm trying to get an ath10k QCA9887 based radio working with WDS
stations. Does anyone know if firmware-5.bin_10.2.4-1.0-00029
supports WDS ?
The driver works fine using the QCA9887 card as an AP;
The same driver, running a QCA9882 based radio card works as a WDS
station, as well as an AP.
Is