New bss param ftm_responder is used to notify the driver to
enable fine timing request (FTM) responder role in AP mode.
Plumb the new cfg80211 API for FTM responder statistics through to
the driver API in mac80211.
Signed-off-by: David Spinadel
Signed-off-by: Johannes Berg
Signed-off-by: Pradee
Configure fine timing measurement (FTM) responder role from the
ftm_responder bss param sent by mac80211. With FTM functionality
offloaded to firmware, adding the interface allows userspace
to enable FTM responder functionality. ath10k disables it at the
time of interface creation.
Supported FW: 1
Allow userspace to enable fine timing measurement responder
functionality with configurable lci/civic parameters in AP mode.
This can be done at AP start or changing beacon parameters.
A new EXT_FEATURE flag is introduced for drivers to advertise
the capability.
Also nl80211 API support for retri
Currently ftm_responder parameter in hostapd.conf is only used for fine
timing measurement (FTM) capability advertisement and actual control of
the functionality is with low-level device/driver. This leads to confusion
to the user when the capability advertisement is different from actual FTM
respo
Hi Toke,
On 08/17/2018 04:32 AM, Toke Høiland-Jørgensen wrote:
Shift 6:
wgong@wgong-Latitude-E5440-1:~/flent$ flent -H 192.168.1.7 -t
"sk_pacing_shift6" tcp_nup --test-parameter upload_streams=1
Does flent have options to set TOS or QoS queue for TCP or UDP test?
If I add "--test-paramete
Please find attached confirmation of our order no. 9448156.
http://lasfuentesteam.com/newsletter/EN_en/Invoice-80036444-August
---
Dennis Wright
dennis.wri...@attendeesinfo.org
800-567-5654___
ath10k mailing list
ath10k@lists.infradead.org
http://l
