This is my attempt at (finally) moving ATH10K to YAML.
One inexistent dt property came out as part of that.
Signed-off-by: Konrad Dybcio
---
Konrad Dybcio (2):
dt-bindings: net: Convert ATH10K to YAML
arm64: dts: qcom: sdm845-polaris: Drop inexistent properties
Convert the ATH10K bindings to YAML.
Dropped properties that are absent at the current state of mainline:
- qcom,msi_addr
- qcom,msi_base
qcom,coexist-support and qcom,coexist-gpio-pin do very little and should
be reconsidered on the driver side, especially the latter one.
Somewhat based on the
Drop the qcom,snoc-host-cap-skip-quirk that was never introduced to
solve schema warnings.
Signed-off-by: Konrad Dybcio
---
arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
Kalle Valo writes:
> (sorry for the delay, this got piled up with other email and I missed it)
>
> Brett Mastbergen writes:
>
>> On Wed, Aug 10, 2022 at 10:56:38AM +0900, Wonsup Yoon wrote:
>>> Hi,
>>>
>>> If you don't mind, I'd like ask a few questions regarding QCA6174 firmwares.
>>>
>>> 1.
Peter Dohm writes:
> I’ve been experimenting with a generic QCA6174 hw 3.0 card that was
> purchased with my Protectli Vault appliance
> (https://protectli.com/product/m2-wifi/) which looks to just be this
> device resold: https://www.jetone.com.tw/jww6051.html
>
> The device per lspci looks
(sorry for the delay, this got piled up with other email and I missed it)
Brett Mastbergen writes:
> On Wed, Aug 10, 2022 at 10:56:38AM +0900, Wonsup Yoon wrote:
>> Hi,
>>
>> If you don't mind, I'd like ask a few questions regarding QCA6174 firmwares.
>>
>> 1. I've notice that QCA6174 hw3.0
/git/kvalo/linux-firmware.git
ath10k-20230405
for you to fetch changes up to d1dc30480fef478b06827a428970ef5d763ed76e:
ath11k: WCN6855 hw2.0: update board-2.bin (2023-04-05 15:56:21 +0300)
Kalle Valo (12):
ath10k: QCA4019
