Dear Sir,
I tested performance throughput test used WPQ864 + QCA9880 11ac 80MHz is
640Mbps that is very low since theoretical data rate is 1300Mbps. It should
be at least 866Mbps. Could you please suggest me how to get better
performance?
thanks,
Phyuthe
_
Dear Sir,
WPQ864 refer to IPQ8064 using LEDE firmware with ath10k driver. If you have
any questions, please feel free to let me know.
thanks,
Phyuthe
-Original Message-
From: Phyu The
Sent: Tuesday, January 10, 2017 2:19 PM
To: ath10k@lists.infradead.org
Subject: QCA9880 3x3 80Mhz
,
Phyuthe
-Original Message-
From: Ben Greear
Sent: Thursday, January 12, 2017 12:59 AM
To: Phyu The ; ath10k@lists.infradead.org
Subject: Re: QCA9880 3x3 80Mhz low performance
We have not done a lot of testing in AP mode, but when using 9880 3x3 compex
NICs
in our 2U rackmounts (high
: Sebastian Gottschall ; Phyu The ; ath10k@lists.infradead.org
Subject: Re: QCA9880 3x3 80Mhz low performance
Hello!
We ran some more tests using our x86 based platforms with 9880 NICs and 9984
NICs
acting as both AP and Station. This is in an isolation chamber, wired up
with SMA cables
and variable
Dear Ben,
I tested same set up with QCA driver, I can achieve 984Mbps. With Ath10k
driver, throughput stuck at 640Mpbs. Can you give me any suggestion?
thanks,
Phyuthe
-Original Message-
From: Ben Greear
Sent: Saturday, February 11, 2017 12:14 AM
To: Phyu The ; Sebastian Gottschall
Dear Ben,
Kindly see attached that I run with Ixchariot used exact same configuration
and set up environment.
thanks,
Phyuthe
-Original Message-
From: Ben Greear
Sent: Monday, February 13, 2017 1:13 PM
To: Phyu The ; Sebastian Gottschall ; ath10k@lists.infradead.org
Subject: Re
