Hi,
Try to get my card running in AP or Managed Mode but neither will work.
Below is a detailed report of the problem and the system setup. If I
left out any information please let me know.
Thanks,
Alan
# lspci -v
alix motherboard with minipci card installed card is a
00:0c.0 Ethernet
On Thu, Feb 26, 2009 at 8:50 PM, Dave Taggart endoto...@ninjabug.org wrote:
So I've been using the ath5K drivers for my Compaq Presario C751NR for
some time now. I appreciate the connectivity, and figured I should show
my support by a modest donation.
And now the request: LED and kill-switch
LED support would be great. I'll be happy to wait for rfkill when it
comes around.
output of lspci -vnn:
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x
802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Hewlett-Packard Company Unknown device
Bob Copeland wrote:
We can easily get LED to work at least.
Speaking about LEDs, it would be nice to have the values of led_pin and
led_on configurable via module parameters or sysctl, as there are some
laptops that mount a card whose ID is already listen in ath5k.h, but
that behaves
On Fri, Feb 27, 2009 at 12:15 PM, Paride Legovini
legov...@spiro.fisica.unipd.it wrote:
Bob Copeland wrote:
We can easily get LED to work at least.
Speaking about LEDs, it would be nice to have the values of led_pin and
led_on configurable via module parameters or sysctl, as there are some
Bob Copeland wrote:
On Fri, Feb 27, 2009 at 12:15 PM, Paride Legovini
legov...@spiro.fisica.unipd.it wrote:
Bob Copeland wrote:
We can easily get LED to work at least.
Speaking about LEDs, it would be nice to have the values of led_pin and
led_on configurable via module parameters or sysctl
Hi,
I get the following errors messages when I try to AP mode
ath5k phy0: beacon queue 7 didn't stop?
also managed or adhoc mode does not work.
Below is my system information. If there is anything I need to send to
report this problem please let me know.
If this is not the correct group to
