Hi, Any update regarding this....? I just observed the following things... 1) When I do interface up, I am getting the GPIO interrupt 2) After that am getting the RXORN interrupt only
r...@172.22.65.122:/home/raghu/HAL/compwifi# ifconfig wlan0 up DEBUG:RAG:brk2:reg->4000,flag->3,val->3,is_set->0 data->3 i->4e20 DEBUG:RAG:brk2:reg->4000,flag->3,val->0,is_set->0 data->0 i->4e20 DEBUG:RAG:brk2:reg->9860,flag->1,val->0,is_set->0 data->9d1a i->4e14 DEBUG::RAG:ah->ah_version = 2 DEBUG:RAG:ISR:status 0x1000000 0x800804b5 DEBUG:RAG:ENDath5k_intr_calibration_poll DEBUG:RAG:brk2:reg->4000,flag->3,val->3,is_set->0 data->3 i->4e20 DEBUG:RAG:brk2:reg->4000,flag->3,val->0,is_set->0 data->0 i->4e20 DEBUG:RAG:brk2:reg->9860,flag->1,val->0,is_set->0 data->9d1a i->4e14 ADDRCONF(NETDEV_UP): wlan0: link is not ready ISR Status-> DEBUG:RAG:ISR:status 0x20 0x800804b5 DEBUG:RAG: AR5K_INT_RXORN DEBUG::RAG:ah->ah_version = 2 DEBUG:RAG:ISR:status 0x20 0x800804b5 DEBUG:RAG: AR5K_INT_RXORN DEBUG::RAG:ah->ah_version = 2 Could you please give me the some background of this error? Is this any register setting problem? So that I can probe in my end Thanks & Regards, Raghu Ramaraj -----Original Message----- From: Raghu Ramaraj Sent: Monday, April 12, 2010 8:10 PM To: 'Joerg Pommnitz'; ath5k-devel@lists.ath5k.org Subject: RE: [ath5k-devel] ath5k phy0: failed to warm reset the MAC Chip Yes I am getting the following r...@172.22.65.72:/home/raghu/HAL# iwlist wlan0 scan __ratelimit: 12 callbacks suppressed ath5k phy0: failed to warm reset the MAC Chip ath5k phy0: can't reset hardware (-5) ath5k phy0: failed to warm reset the MAC Chip ath5k phy0: can't reset hardware (-5) ath5k phy0: failed to warm reset the MAC Chip ath5k phy0: can't reset hardware (-5) ath5k phy0: failed to warm reset the MAC Chip ath5k phy0: can't reset hardware (-5) ath5k phy0: failed to warm reset the MAC Chip ath5k phy0: can't reset hardware (-5) wlan0 No scan results Thanks & Regards, Raghu Ramaraj -----Original Message----- From: ath5k-devel-boun...@lists.ath5k.org [mailto:ath5k-devel-boun...@lists.ath5k.org] On Behalf Of Joerg Pommnitz Sent: Monday, April 12, 2010 2:51 PM To: ath5k-devel@lists.ath5k.org Subject: Re: [ath5k-devel] ath5k phy0: failed to warm reset the MAC Chip Raghu Ramaraj <raghu_rama...@...> writes: > > > Hi > This is the one right... Yes, this is the patch I meant. > --- wireless-testing/drivers/net/wireless/ath/ath5k/base.c 2010-03-19 09:55:26.000000000 +0100 > +++ ../wireless-testing/drivers/net/wireless/ath/ath5k/base.c 2010-03-19 09:30:23.000000000 +0100 > @@ -2894,7 +2894,12 @@ > { > int ret; > > - ret = ath5k_reset(sc, sc->curchan); > + if ((ret = ath5k_reset(sc, sc->curchan)) != 0) { > + int ret2 = ath5k_reset(sc, sc->curchan); > + ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "ath5k_reset failed with %d, retry was %d\n", ret, ret2); > + ret = ret2; > + } > + > if (!ret) > ieee80211_wake_queues(sc->hw); > > I have tried this also ... I am getting the error... What error? Still the original one ("failed to warm reset the MAC Chip") or the new debug statement ("ath5k_reset failed with %d, retry was %d")? Regards Joerg _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel http://www.mindtree.com/email/disclaimer.html _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel