> I uploaded a compat-wireless snapshot with only ath5k enabled... > http://www.kernel.org/pub/linux/kernel/people/mickflemm/compat-wireless-2008-07-03-ath5k.tar.bz2 > > Check it out and see how it goes ;-)
Hi, this is working pretty good here. I tested station mode (including WPA2, WEP), monitor and ad-hoc mode (without encryption). ath5k_pci 0000:02:00.0: registered as 'phy0' ath5k phy0: Support for RF2425 is under development. phy0: Selected rate control algorithm 'pid' ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) # lspci -vnns 02:00.0 02:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01) Subsystem: Unknown device [1a3b:1026] Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> Kernel driver in use: ath5k_pci Kernel modules: ath5k I didn't do any real perfomance testing, but it seems good enough for daily use to me. :-) Thomas Klute _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel