Hi Friends,
Hope all are doing good. My doubt regarding channel allocation for atheros
ath9k is still unclear. I am currently trying to find out the channels used
by the nearby Access Points during the boot phase. I understood that the
function ath_set_channel in main.c ( Please take a look of th
I am trying to do something like what Cisco has done with a concept called
controllers. Any help and pointers for doing something like this with ath9k
is much appreciated.
Reference : http://www.mywi-fi.info/2010/05/dynamic-channel-assignment.html
Awaiting your kind reply.
On Mon, Jul 4, 2011 at
Hi all,
for a research project we are trying to use TPC per packet on AR9380
chipsets. We are setting the AR_PHY_POWER_TX_RATE_MAX_TPC_ENABLE bit in the
AR_PHY_POWER_TX_RATE_MAX register. Then we are setting the desired tx power
in word 11 of the tx descriptor. Setting the power on all other chips
On Mon, Jul 4, 2011 at 1:04 PM, Swaminathan Vasanth Rajaraman
wrote:
> I am trying to do something like what Cisco has done with a concept called
> controllers. Any help and pointers for doing something like this with ath9k
> is much appreciated.
>
> Reference : http://www.mywi-fi.info/2010/05/dyn
Hi,
Thank u very much. :-)
On Mon, Jul 4, 2011 at 11:56 AM, Mohammed Shafi wrote:
> On Mon, Jul 4, 2011 at 1:04 PM, Swaminathan Vasanth Rajaraman
> wrote:
> > I am trying to do something like what Cisco has done with a concept
> called
> > controllers. Any help and pointers for doing something
2011/7/1 Adrian Chadd :
> On 1 July 2011 01:34, Robert Högberg wrote:
>
>> Would it be possible to only perform NF calibrations when signal
>> strength or some other quality related parameter changes? Or is this
>> as good as it gets with this chip?
>
> You have to do it periodically or things "dr
