true its an already reported platform specific issue, usually they use
this id for emulation testing. as a workaround this PID has to be
added to support this card in that specific platform
On Mon, Oct 10, 2011 at 8:06 PM, Adrian Chadd adr...@freebsd.org wrote:
.. sounds like another PCI bus
Hi!
I want to use an AR9380 mini pci-e module on kirkwood. under x86 the
module
works fine and appears as product-id 0x0030, on kirkwood the same
module shows
up as product-id 0xabcd.
Anyone knows possible reasons for this to happen?
(First I suspected there could be an PCI expansion ROM
Recently, a patch for an IBSS mode HT support has been released (Ref.:
https://forum.openwrt.org/viewtopic.php?pid=137989) but the performance is
not as same as AP-STA mode. Regarding to AP-STA mode connection, I want to
improve performance because my AP provides kust 40Mbps throughput. FYI, I
I've seen this happen on legacy nics:
* when the nic had failed (an ar9227 nic);
* when someone changed motherboards (various ar5212 era nics).
The latter is something I'm currently digging into. There seems to be
some subtle PCI reset/setup stuff going on (eg by changing some PCI
parameters in
Sure, that's what I did already to make it work at least a bit, but run into DMA
problems once there was any serious traffic (using Kernel 2.6.39 and
compat-wireless 2011-06-20)
Kernel 3.0.4 with compat-wireless 2011-10-05 seems to work quite nice, at least
for now... I'll continue testing that in
On Tue, Oct 11, 2011 at 6:06 PM, Daniel Golle dgo...@allnet.de wrote:
Sure, that's what I did already to make it work at least a bit, but run into
DMA
problems once there was any serious traffic (using Kernel 2.6.39 and
compat-wireless 2011-06-20)
Kernel 3.0.4 with compat-wireless 2011-10-05
Hello all,
Using SR71-A with atheros 9160 chip and ath9k (2011-6-25 conpat),I still can
not put 40MHz and short GI into effect.Right now ,I only get MCS15 in
20MHz,130Mbps.
My question what should I configure to put 40MHz and short GI into effect?
Thanks for giving back!
2011-10-11
On Tue, Oct 11, 2011 at 7:25 PM, songzhang songzh...@tju.edu.cn wrote:
Hello all,
Using SR71-A with atheros 9160 chip and ath9k (2011-6-25 conpat),I still can
not put 40MHz and short GI into effect.Right now ,I only get MCS15 in
20MHz,130Mbps.
My question what should I configure to put 40MHz
Hello,
Here is a description of my system :
Linux : 2.6.35-22-generic (on a ubuntu 10.04 LTS)
My wifi card is : 02:00.0 Network controller: Atheros Communications Inc.
AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
dmesg outputs about the wifi controller are :
Oct 10 17:28:49
Hi.
When using the ath9k module my system freezes in less than a few minutes, and
I'm not able to find out why. Could someone help me by telling me where to find
useful information on where or why this happens? (Or should i begin to insert
my own debugging-output in the code???)
The crashes
Thanks a lot Mohammed!
I change 40MHz preferences,HT40+ in wireless file,and then it starting
running!wow! That is to say my card can run at MCS 15 in 40MHz and short
GI,300Mbps.But there is another problem,the throughput is not more than 150Mbps
and MCS can not keep at 15 for long time. I
On Tue, Oct 11, 2011 at 9:29 PM, BARRAL Adrien
adrien.bar...@robopec.com wrote:
Hello,
Here is a description of my system :
Linux : 2.6.35-22-generic (on a ubuntu 10.04 LTS)
My wifi card is : 02:00.0 Network controller: Atheros Communications Inc.
AR9285 Wireless Network Adapter
Hello All,
I recently posted about stability problems with ath9k while running a
2.6.35/38 -era kernel. I decided to see if the problems were gone in the
newest code, by updating to the latest compat-wireless-2011-10-10.
Also updated to hostapd-0.7.3 in the process.
I have successfully
13 matches
Mail list logo
