Re: [ath9k-devel] Can't associate with a particular AP

2011-10-27 Thread Julien Valroff
Le jeudi 27 oct. 2011 à 22:27:58 (+0200 CEST), Jouni Malinen a écrit : > On Thu, Oct 27, 2011 at 09:13:53PM +0200, Julien Valroff wrote: > > Le jeudi 27 oct. 2011 à 20:36:06 (+0200 CEST), Julien Valroff a écrit : > > > Le lundi 24 oct. 2011 à 21:55:01 (+0200 CEST), Jouni Malinen a écrit : > > > > i

Re: [ath9k-devel] Can't associate with a particular AP

2011-10-27 Thread Peter Stuge
Julien Valroff wrote: > Should the interface be associated when capturing? No, rather the opposite. Ideally it should be passive in the wireless network that it is monitoring. I've had good success with monitoring mode and various Intel wifi chipsets. //Peter

Re: [ath9k-devel] Can't associate with a particular AP

2011-10-27 Thread Jouni Malinen
On Thu, Oct 27, 2011 at 09:13:53PM +0200, Julien Valroff wrote: > Le jeudi 27 oct. 2011 à 20:36:06 (+0200 CEST), Julien Valroff a écrit : > > Le lundi 24 oct. 2011 à 21:55:01 (+0200 CEST), Jouni Malinen a écrit : > > > ifconfig wlan0 down > > > iw wlan0 set type monitor > > > iw wlan0 set channel 6

Re: [ath9k-devel] Can't associate with a particular AP

2011-10-27 Thread Julien Valroff
Le jeudi 27 oct. 2011 à 20:36:06 (+0200 CEST), Julien Valroff a écrit : > Le lundi 24 oct. 2011 à 21:55:01 (+0200 CEST), Jouni Malinen a écrit : > [...] > > You do not need to use Wireshark for the sniffer setup. Assuming the > > driver supports monitor mode, you can do this from the command line a

Re: [ath9k-devel] Can't associate with a particular AP

2011-10-27 Thread Julien Valroff
Le lundi 24 oct. 2011 à 21:55:01 (+0200 CEST), Jouni Malinen a écrit : [...] > You do not need to use Wireshark for the sniffer setup. Assuming the > driver supports monitor mode, you can do this from the command line as > root: > > ifconfig wlan0 down > iw wlan0 set type monitor > iw wlan0 set ch

Re: [ath9k-devel] AR9285 and Thompson TG585 v8 connection problems

2011-10-27 Thread Adrian Chadd
Wait a sec! That's still a bug. Still very a bug! (And a bug with FreeBSD too!) The AR9285 has two RX and one TX radio. It _can_ have: * no antenna switch, so the RX mixing is done on the chip itself (the A+B, A-B, A, B RX antenna diversity code) - where TX only occurs on one antenna; * an antenn

Re: [ath9k-devel] AR9285 and Thompson TG585 v8 connection problems

2011-10-27 Thread David Summers
Just to close this thread down. Eventually got to the bottom of the problem - it wasn't a fault in ath9k. What it turns out is that the wireless wasn't putting out enough signal for the router to respond. It has two antenna ports on the back, by wiring an antenna in to both of these - a connect