bonjour,
Ai besoin de configurer wifi wireless 802.11 wlan0 ath9k sous mandriva 2011.
Merci.
Larion R;
___
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
On 01/07/12 22:51, Adrian Chadd wrote:
> That looks quite odd. What endian-ness is it all supposed to be?
Little Endian
Could it be a byte-swapping issue...?
root@OpenWrt:/# lspci -vv
00:00.0 Memory controller: Marvell Technology Group Ltd. 88F6281 [Kirkwood] ARM
SoC (rev 03)
Subsystem: M
On 28 June 2012 07:14, Kai Scharwies wrote:
.
>
> I had similar problems when the regulatory settings (using crda)
> collided with the regdomain of my Atheros cards.
> In my point of view this is unnecessary, as the card isn't always
> operated where it was build or bought. Setting the allowed cha
That looks quite odd. What endian-ness is it all supposed to be?
Adrian
On 1 July 2012 01:18, Daniel Golle wrote:
> Hi!
> I'm trying to use a Senao EMP7606 module (AR9380) on a Marvell Kirkwood
> 88FR131-based board running OpenWrt r32511 with Linux 3.3.8 and
> compat-wireless-2012-06-14.
> I'
Kamran asked me privately about this.
The fields are available in the RX descriptor. The question is whether
there's some default radiotap 802.11 header bits that could be set to
indicate received aggregate boundaries, or whether it should be
stuffed into a radiotap vendor extension header.
I've
Hi!
I'm trying to use a Senao EMP7606 module (AR9380) on a Marvell Kirkwood
88FR131-based board running OpenWrt r32511 with Linux 3.3.8 and
compat-wireless-2012-06-14.
I'm unable to figure out the reason for the card not working properly. Please
advise me on how I should go on debugging/investigati