Hello ,
Can any tell ...How to fix transmission rate in ath9k driver
During experiment when I put one node on monitoring nodeon wireshark
I found MPDU's within 1 A-MPDU shows different transmission rate.As per my
understanding
in 802.11n all MPDU withing A-MPDU should transmit with the sa
Hello,
I asked this question once before but didn't get a satisfying answer. In
our experiments, with two laptops running Ath9k driver we get about 29
Mbps bandwidth (802.11g configuration + UDP traffic), but when the
monitor mode interface is enabled on the sender the throughput drops to
25
On 23 October 2012 12:06, Ali Abedi wrote:
> Hello,
>
> I asked this question once before but didn't get a satisfying answer. In
> our experiments, with two laptops running Ath9k driver we get about 29
> Mbps bandwidth (802.11g configuration + UDP traffic), but when the
> monitor mode interface i
Thanks Adrian. But there is no problem on the receiver side I assume
(monitor mode is not enabled on the receiver). There are gaps between
frames sent by the sender. It seems that the sender is waiting or doing
something between frames (other than back-off, DIFS, ...) when the
monitor mode is e
On 23 October 2012 13:36, Ali Abedi wrote:
> Thanks Adrian. But there is no problem on the receiver side I assume
> (monitor mode is not enabled on the receiver). There are gaps between frames
> sent by the sender. It seems that the sender is waiting or doing something
> between frames (other than
