[ath9k-devel] (no subject)

___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel

[ath9k-devel] (no subject)

Hi, my name is Diego and I'm a Master Student. My research is about Available Bandwidth Tools on 802.11n networks, the influence of MAC layer. I want to work with TP-Link TLWN822N USB Adapter, which use Atheros Chipset and Ath9k_htc driver. But I don't know how I can enable and disable MAC layer

Re: [ath9k-devel] (no subject)

Looks like in new kernel. There are no fixed_rate_idx and mac80211 subdirectory. On Tuesday, April 15, 2014 1:01 AM, 里约的芒果 wrote: Hi, I'm now using the Minstrel_ht as a rate control scheme in aht9k NIC driver, but find that I can't control the tx rate by set the fixed_rate_idx in /sys/kernel/d

[ath9k-devel] (no subject)

Hi, I'm now using the Minstrel_ht as a rate control scheme in aht9k NIC driver, but find that I can't control the tx rate by set the fixed_rate_idx in /sys/kernel/debug/phy0/rc/ to a fixed value. Who can tell me what's wrong and who have some useful methods to set the fixed tx rate? I will be ap

Re: [ath9k-devel] (no subject)

Hi Aman, On 4 Jan, 2014, at 11:28 AM, Aman Sharma wrote: > Hi All, > > I am facing issue regarding 4 address mode in Board acting as Station using > ath9k, Below is setup details: > > > Laptop1 ---(AP) --- (STA)---Laptop2 > atheros ath9k >

Re: [ath9k-devel] (no subject)

Hi Bruno, Thanks for your quick reply. In STA we are using ath9k (mac80211) driver and in AP we are using propriety driver from atheros Fusion (same flavor as madwifi). it has wds option enabled already. You are right 4 address mode should work with this implementation but as wds is not standard

Re: [ath9k-devel] (no subject)

Hi Sujith, yes, we are using non-mac80211 driver in "*atheros"(AP mode)*. In STA mode, We are enabling 4 address mode using command *iw dev wlan0 set 4addr on.* And in AP mode, we are not enabling or disabling WDS. Thanks for your help. With Regards Aman Sharma On Mon, Jan 6, 2014 at 11:33

Re: [ath9k-devel] (no subject)

Aman Sharma wrote: > Hey Bruno, > > One more thing: > > Laptop1 ---(AP)      ---     (STA)---Laptop2 >                  atheros              ath9k > > If the STA interface is not in bridge then Laptop2 is able to get Ip from AP > but if the STA interface is in Bridge using 4 address

Re: [ath9k-devel] (no subject)

Hey Bruno, One more thing: Laptop1 ---(AP) --- (STA)---Laptop2 atheros ath9k If the STA interface is not in bridge then Laptop2 is able to get Ip from AP but if the STA interface is in Bridge using 4 address mode then its not able to take Ip fro

Re: [ath9k-devel] (no subject)

Hey Bruno, What's the contents of /etc/config/network of STA? ls /etc/network if-down.d if-post-down.d if-pre-up.d if-up.d interfaces run What's the contents of /etc/config/wireless of AP? *Below is the attach file for the content of /etc/config/wireless/* *I am connecting STA to the wir

[ath9k-devel] (no subject)

Hi All, I am facing issue regarding 4 address mode in Board acting as Station using ath9k, Below is setup details: Laptop1 ---(AP) --- (STA)---Laptop2 atheros ath9k I have added wireless interface of STA into Bridge, to do so i have enabled 4 a

[ath9k-devel] (no subject)

hello can we force ath9k to send every packet as an AMPDU. Currently if there is only one packet in the queue then ath9k tell the hardware to just send it as MPDU. Is there a way to ask driver to wait for more packets and send them as AMPDU? Simple wait is not working in ath_tx_start(), ath_tx_sen

[ath9k-devel] (no subject)

Hello , Can any tell ...How to fix transmission rate in ath9k driver During experiment when I put one node on monitoring nodeon wireshark I found MPDU's within 1 A-MPDU shows different transmission rate.As per my understanding in 802.11n all MPDU withing A-MPDU should transmit with the sa

[ath9k-devel] (no subject)

Hello oiioeu, I just saw your question.Same performance I also experience during my experiment. But, as per active research group of ATH9K ,many researcher says "A-MSDU aggregation yet not supported by ath9k". But , I am also interested ,if some one give there opinion abt it. AP configuration f

[ath9k-devel] (no subject)

ok following the direction received from an e mail... said to send my e-mail to this address if I wanted to post so here it is in the from section =) hope i got this right, I hope you guys can help with an issue I am having MadcapMagician

Re: [ath9k-devel] (no subject)

Ben Greear wrote: > Motherboard, OS, and any other info should be helpful as well. > > My hope is that if we can get enough detailed reports we > might can see a pattern. For my own part, my MB is an old MSI MS-6390. I notice that booting with acpi=off seems to alleviate the problem to *some* ext

Re: [ath9k-devel] (no subject)

On 02/04/2012 04:43 AM, Mieszko Ślusarczyk wrote: > I was getting the same error message, when using my card (TP-LINK-WN851ND) > with hosted (in master mode) as an access point. After few minutes of steady > transfer > at about 7-8 Mbytes network was going down with repeating "Failed to stop TX

Re: [ath9k-devel] (no subject)

I was getting the same error message, when using my card (TP-LINK-WN851ND) with hosted (in master mode) as an access point. After few minutes of steady transfer at about 7-8 Mbytes network was going down with repeating "Failed to stop TX DMA" messages.. tried out compat-wireless 3.0, 3.1, and

Re: [ath9k-devel] (no subject)

On Sat, Jan 7, 2012 at 5:49 PM, Anup Krishnan wrote: > Hi, > > Does ath9k_htc support mesh point mode in any linux kernel? not yet but there was an RFC sent http://permalink.gmane.org/gmane.linux.kernel.wireless.general/81716 > > ___ >

[ath9k-devel] (no subject)

Hi, Does ath9k_htc support mesh point mode in any linux kernel? ___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Re: [ath9k-devel] (no subject)

Hi Shafi, I download and decompress "compat-wireless-2.6.tar.bz2" then run script/driver-select ath9k. When I run "make KLIB=/home/leo/NAS_AP_Team_NAND_SDK_2016/SDK_3.0.0-sources/linux-kernel KLIB_BUILD=/home/leo/NAS_AP_Team_NAND_SDK_2016/SDK_3.0.0-sources/linux-kernel", I got some err

Re: [ath9k-devel] (no subject)

On Saturday 15 Oct 2011, sekharjyoti deka wrote: > Thanx Adrian, > > For your valuable reply. but i was concentrating on modification of > some sort of parameters like changing of slot timing and also the ack > time to get maximal throughput of the network..Since i am trying to > modify ath9k for

Re: [ath9k-devel] (no subject)

Thanx Adrian, For your valuable reply. but i was concentrating on modification of some sort of parameters like changing of slot timing and also the ack time to get maximal throughput of the network..Since i am trying to modify ath9k for long distance network like it should cover a distance about 3

[ath9k-devel] (no subject)

Thanx Adrian, For your valuable reply. but i was concentrating on modification of some sort of parameters like changing of slot timing and also the ack time to get maximal throughput of the network..Since i am trying to modify ath9k for long distance network like it should cover a distance about 3

Re: [ath9k-devel] (no subject)

On Sun, Sep 18, 2011 at 02:39:06PM +0800, Adrian Chadd wrote: > On 18 September 2011 14:32, Alex Hacker wrote: > > > The chainmasks are limit set of antennas used for RX and TX, both settings > > can be > > changed in debugfs 'ieee80211/phyX/ath9k'. The distance limit is all Aheros > > cards >

Re: [ath9k-devel] (no subject)

On 18 September 2011 14:32, Alex Hacker wrote: > The chainmasks are limit set of antennas used for RX and TX, both settings > can be > changed in debugfs 'ieee80211/phyX/ath9k'. The distance limit is all Aheros > cards > property due to maximum setting for the ACK timeout. It can be set with >

Re: [ath9k-devel] (no subject)

On Sat, Sep 17, 2011 at 07:25:36PM +0530, subham das wrote: >Hello Alex, >Can you please describe a little about RX/TX chain masks setting to 1, and >about the maximum distance that you told was with reference to which >antenna or nic card. > The chainmasks are limit set of antenna

Re: [ath9k-devel] (no subject)

Hello Alex, Can you please describe a little about RX/TX chain masks setting to 1, and about the maximum distance that you told was with reference to which antenna or nic card. On Fri, Sep 16, 2011 at 10:42 PM, Alex Hacker wrote: > I think no any modifcations of the driver code are required. If

Re: [ath9k-devel] (no subject)

Thank you every one, i shall surely try those out. ___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Re: [ath9k-devel] (no subject)

I think no any modifcations of the driver code are required. If your card has MIMO capability (based on AR9160, AR9220, AR9280, AR9380 or AR9390 chips) you need to set RX/TX chain masks to 1 and connect your antenna to the fisrst chain connector. For the long links you need to adjust coverage cl

Re: [ath9k-devel] (no subject)

subham das wrote: > I would like to connect a Directional Antenna to my laptop Atheros > wireless card by some way/means and still use the ath9k driver The driver doesn't care much about the antenna. You just need to connect your directional antenna to the u.FL connector on the wifi card, inside y

[ath9k-devel] (no subject)

I would like to connect a Directional Antenna to my laptop Atheros wireless card by some way/means and still use the ath9k driver to transmit/carry the network connection to a far of (long) distance as much as possible on the Line Of Sight. My basic idea is transmitting/carrying ( not routing) the

[ath9k-devel] (no subject)

stop___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel

[ath9k-devel] (no subject)

http://dehler-pollozek.de/images/aast.php http://www.youtube.com/watch?v=RUzLhHH7gHg ___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel

[ath9k-devel] (no subject)

Atentamente: Jaime Lozano Padilla Administrador de Bases de Datos Oracle Teléfono: 5322-0497 ext. 85454 Email: jaime.loz...@fovissste.gob.mx ADVERTENCIA LEGAL Este mensaje contiene información confidencial y privilegiada. Se entiende dirigido y para uso exclusivo del destinat

Re: [ath9k-devel] (no subject)

On Sat, May 23, 2009 at 1:30 PM, Jeff Hansen wrote: > Hello, > > I have a TrendNet 652-BRP running OpenWRT + ath9k very well.  The only > problem is that the beacon gets stuck maybe once a day.  After Vasanthakumar > Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k > wou

[ath9k-devel] (no subject)

>From 4d139e865c94b32c1421ae74891b8a0b49becbc8 Mon Sep 17 00:00:00 2001 From: Jeff Hansen Date: Wed, 27 May 2009 04:17:30 + Subject: [PATCH 3/3] mac80211: Fix typos in "set default QoS values according to spec" Some of the acwmin and acwmax values were backwards in the original patch, which

[ath9k-devel] (no subject)

>From caf1d435ed79dd0fd81f9e3a7d944356da45f1b2 Mon Sep 17 00:00:00 2001 From: Jeff Hansen Date: Wed, 27 May 2009 04:13:30 + Subject: [PATCH 1/3] ath9k: Combine legacy and 11n rc statistics This patch combines the legacy and 11n rcstats into one, using the normal rate table indices instead of

[ath9k-devel] (no subject)

>From 873681727982402f9cc212a270f9db411fd41ba4 Mon Sep 17 00:00:00 2001 From: Jeff Hansen Date: Wed, 27 May 2009 04:09:43 + Subject: [PATCH 0/3] ath9k: Reset SC_OP_TSF_RESET flag after stuck beacon I have a TrendNet 652-BRP running OpenWRT + ath9k very well. The only problem is that the beac

[ath9k-devel] (no subject)

>From 20d4e5280a300d8c38493f73d87ab3e28c28 Mon Sep 17 00:00:00 2001 From: Jeff Hansen Date: Wed, 27 May 2009 04:15:04 + Subject: [PATCH 2/3] ath9k: Add "debug" file to debugfs This patch adds the debug file to the ath9k debugfs, which lets you modify the debug_mask at runtime, without hav

Re: [ath9k-devel] (no subject)

On Sat, May 23, 2009 at 10:30 AM, Jeff Hansen wrote: > Hello, > > I have a TrendNet 652-BRP running OpenWRT + ath9k very well.  The only > problem is that the beacon gets stuck maybe once a day.  After Vasanthakumar > Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k > wo

[ath9k-devel] (no subject)

Hello, I have a TrendNet 652-BRP running OpenWRT + ath9k very well. The only problem is that the beacon gets stuck maybe once a day. After Vasanthakumar Thiagarajan's "ath9k: cleanup beacon parameters configuration" patch, ath9k would nearly re-configure the beacons after it detected the st

[ath9k-devel] (no subject)

___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Re: [ath9k-devel] (no subject)

On Thu, Jan 29, 2009 at 09:05:23AM -0800, Voitek Burski wrote: > May I be exclude from the list. You unsubscribe here: https://lists.ath9k.org/mailman/listinfo/ath9k-devel Luis ___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.at

[ath9k-devel] (no subject)

May I be exclude from the list. With regards Voitek Burski ___ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Re: [ath9k-devel] (no subject)

about tcpdump was it kept saying "unknown 802.11 header (3)" something like that at times. --- On Wed, 9/24/08, Luis R. Rodriguez <[EMAIL PROTECTED]> wrote: From: Luis R. Rodriguez <[EMAIL PROTECTED]> Subject: Re: [ath9k-devel] (no subject) To: "Vaibhav Chhabra"

Re: [ath9k-devel] (no subject)

On Wed, Sep 24, 2008 at 01:38:25PM -0700, Luis Rodriguez wrote: > On Wed, Sep 24, 2008 at 01:26:01PM -0700, Vaibhav Chhabra wrote: > > so last night i reverted back to linux-source-2.6.26 (debian) and used > > "compat-wireless-ath9k-20080916.tar.gz

Re: [ath9k-devel] (no subject)

On Wed, Sep 24, 2008 at 01:26:01PM -0700, Vaibhav Chhabra wrote: > so last night i reverted back to linux-source-2.6.26 (debian) and used > "compat-wireless-ath9k-20080916.tar.gz" > from: http://ubuntuforums.org/sho

Re: [ath9k-devel] (no subject)

s) or someone trying to get AR9281 wireless cards to work on any debian flavor. Any feed back would be appreciated. Thanks, Vib --- On Tue, 9/16/08, Vaibhav Chhabra <[EMAIL PROTECTED]> wrote: From: Vaibhav Chhabra <[EMAIL PROTECTED]> Subject: Re: [ath9k-devel] (no subject) To: "

Re: [ath9k-devel] (no subject)

will try that... and post results. Thanks --- On Tue, 9/16/08, Jean Schurger <[EMAIL PROTECTED]> wrote: > From: Jean Schurger <[EMAIL PROTECTED]> > Subject: Re: [ath9k-devel] (no subject) > To: "ath9k-devel@lists.ath9k.org" > Date: Tuesday, September 16, 200

Re: [ath9k-devel] (no subject)

Le mardi 16 septembre 2008 à 11:21 -0700, Vaibhav Chhabra a écrit : > "iwlist wlan0 scan" does show my router. > I have another box with broadcom wireless card and it works fine > running gentoo linux. can you monitor the "trafic" betwin your aheros card and your AP ? (using aircrack-ng, tcpd

Re: [ath9k-devel] (no subject)

"iwlist wlan0 scan" does show my router. I have another box with broadcom wireless card and it works fine running gentoo linux. --- On Tue, 9/16/08, Jean Schurger <[EMAIL PROTECTED]> wrote: From: Jean Schurger <[EMAIL PROTECTED]> Subject: Re: [ath9k-devel] (no su

Re: [ath9k-devel] (no subject)

Le mardi 16 septembre 2008 à 11:07 -0700, Vaibhav Chhabra a écrit : > I recently installed Elive (debian flavor) of linux and compiled > kernel 2.6.27-rc6 inorder to get ath9k. My card is a atheros AR9281. I > use 802.11g at home. > > What i can't seem to understand is that i can't get a dhcp o

[ath9k-devel] (no subject)

I recently installed Elive (debian flavor) of linux and compiled kernel 2.6.27-rc6 inorder to get ath9k. My card is a atheros AR9281. I use 802.11g at home.   What i can't seem to understand is that i can't get a dhcp offer. I am sitting right next to my router and get no ip on: dhclient wlan0.