Hello,
I am attempting to build an AP that can support airplay streaming
between various mac devices. My current test bed is as follows:
Macbook Pro 10,2 (13" Retina), with an Airport Extreme (0x14E4, 0x10F)
card, which is using the BCM43xx driver (according to system report).
Apple TV Gen 3 (no
On 2013-06-20 6:05 PM, Adam Allred wrote:
> Hello,
>
> I am attempting to build an AP that can support airplay streaming
> between various mac devices. My current test bed is as follows:
>
> Macbook Pro 10,2 (13" Retina), with an Airport Extreme (0x14E4, 0x10F)
> card, which is using the BCM43xx
I picked it up off of
http://ubuntuforums.org/showthread.php?t=1746326
and only tried it after I had a working connection, just to see if it
would make a difference, since it's ubuntu and a AR92xx series card in
that post. Performance is the same both with and without this option.
Adam
On Thu,
On 2013-06-20 6:49 PM, Adam Allred wrote:
> I picked it up off of
>
> http://ubuntuforums.org/showthread.php?t=1746326
>
> and only tried it after I had a working connection, just to see if it
> would make a difference, since it's ubuntu and a AR92xx series card in
> that post. Performance is the
> OK. Better leave it out from now on, it's not a good idea to use random
> workarounds for old issues on a different wifi chip :)
>
Sure. It was there as a shot in the dark after a frustrating day. It's gone.
> I think you should start by using more recent drivers, Linux 3.2 is a
> bit old. Pick
> I cannot go lower than the phy0 directory in that path when setting a
> debug mode in the modprobe conf file, I assume its because the driver
> isn't compiled with debugging symbols. I'll re-compile tomorrow and
> post the contents of rc_stats.
So...maybe I'm missing something, but after followi
On 2013-06-21 4:09 PM, Adam Allred wrote:
>> I cannot go lower than the phy0 directory in that path when setting a
>> debug mode in the modprobe conf file, I assume its because the driver
>> isn't compiled with debugging symbols. I'll re-compile tomorrow and
>> post the contents of rc_stats.
>
> S
I think it's already on in the debian 3.9 kernel .config
(CONFIG_MAC80211_DEBUGFS=y), and I do not see a parameter to turn it
on via modinfo.
Sorry to run down the rabbit hole...
Adam
On Fri, Jun 21, 2013 at 11:29 AM, Felix Fietkau wrote:
> On 2013-06-21 4:09 PM, Adam Allred wrote:
>>> I canno
On 2013-06-21 5:41 PM, Adam Allred wrote:
> I think it's already on in the debian 3.9 kernel .config
> (CONFIG_MAC80211_DEBUGFS=y), and I do not see a parameter to turn it
> on via modinfo.
>
> Sorry to run down the rabbit hole...
Maybe you need CONFIG_CFG80211_DEBUGFS=y as well.
There's no runtim
I run a similar set up using a sparklan WPEA-127N on fedora 17 and I am
see my stats in
/sys/kernel/debug/ieee80211/phy0/netdev:wlan1/stations/54:26:96:cf:1e:a3
but rc_stats is empty. I do have a file called current_tx_rate and the
value in there is 117.0 MBit/s
After having trouble with my 9
See my hostapd.conf at the beginning of this thread. I had trouble
with video streaming until I dropped in the various wmm_ and tx_
options. Admittedly, I do not know what they all mean, but the
internet claims they affect video and audio streams for the better.
On Fri, Jun 21, 2013 at 11:03 PM, P
Well, confoundable. I have recompiled both cfg80211 and mac80211 with
the DEBUGFS flags set to yes, and I'm still not seeing anything under
the phy0 directory.
At this point, I'm stumped. I cannot locate anything on the internet
describing my problem. I'll keep digging, but any help is appreciated
* On 24.06.2013 04:17 PM, Adam Allred wrote:
> Well, confoundable. I have recompiled both cfg80211 and mac80211 with
> the DEBUGFS flags set to yes, and I'm still not seeing anything under
> the phy0 directory.
I do. Albeit with a WPEA-127NI card.
Check:
CONFIG_CFG80211_DEBUGFS=y
CONFIG_MAC80211_D
I've checked all of those. They are all set.
Adam
On Mon, Jun 24, 2013 at 10:53 AM, Mihai Moldovan wrote:
> * On 24.06.2013 04:17 PM, Adam Allred wrote:
>> Well, confoundable. I have recompiled both cfg80211 and mac80211 with
>> the DEBUGFS flags set to yes, and I'm still not seeing anything un
* On 24.06.2013 05:31 PM, Adam Allred wrote:
> I've checked all of those. They are all set.
>> I do. Albeit with a WPEA-127NI card.
Scratch that, it's WPEA-127N exactly. AR9380. Very same card you have. ;)
What about...
CONFIG_ATH_DEBUG
And just for good measure:
CONFIG_MAC80211_DEBUG_MENU
CONFI
root@aero:/sys/kernel/debug/ieee80211/phy0# ls -la
total 0
drwxr-xr-x 2 root root 0 Jun 24 15:29 .
drwxr-xr-x 3 root root 0 Jun 24 15:29 ..
root@aero:/sys/kernel/debug/ieee80211/phy0# mount
...
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
...
root@aero:/sys/kernel/debug/ieee80211/phy
16 matches
Mail list logo
