SBGK;676517 Wrote:
> if you want to try the full set
> here is my priority section from the tt file, all pids 40 and below set
> to sched_other except for spdif which is still at 40
>
> have not found any problems with these settings - I use ethernet, no
> remote, digital coax out
>
> beautiful
SBGK;676518 Wrote:
> I have searched, but cannot find a step by step set of instructions for
> the mods. Not being an expert, I found the annotated picture confusing
> especially the u94 change where he says connect the pins to 2 other
> components. Do you have any better description or instructi
Audio Bling;676358 Wrote:
> I have performed these mods and can recommend them. Result is reduced
> background hash / much “cleaner” sound. True, high-order soldering
> skills are required. You could disassemble the Touch yourself and take
> it to a local techo for the work. It would take him (he
if you want to try the full set
here is my priority section from the tt file, all pids 40 and below set
to sched_other except for spdif which is still at 40
beautiful sound, though you probably need the resolution to appreciate
it.
remember to save a copy of tt before changing.
#change process
The HDR came out (literally) 1 month after I just bought my DAC/PRE! I
was mad as hell, I would have been all over that remote control
situation.
--
steveinaz
- transport: squeezebox touch / ci audio ps
- dac: benchmark dac/pre
- linestage: placette passive
- power amplifier: parasound hca-150
steveinaz;676432 Wrote:
> Any of the Benchmarks can be used in preamp mode--to include the base
> DAC1. I run mine line level, into a Placette passive linestage.
Ah...I did know that. But I'd forgotten. I shall quit this thread
whilst I'm behind(!)
That base DAC1 is a bargain to be sure (althou
darrenyeats;676395 Wrote:
> I missed the fact you were very happy with your AV preamp. In that case
> steveinaz's recommendation about the base model is spot on.
>
> I wasn't thinking about op amps or AES/EBU...just the analogue
> attenuator...but I see now that you don't want that.
>
> Best re
Soulkeeper;676347 Wrote:
> Or... 'modify the caps at analog out?'
> (http://forums.slimdevices.com/showthread.php?t=83412) ;) It's free
> unless you botch it.
Good idea thanks, I had forgoted about this mod :)
--
andyjayh
Lounge - SB Touch with TT3.0, XBMC ASRock, Proceed AVP2, CinePro 3K6,
Any of the Benchmarks can be used in preamp mode--to include the base
DAC1. I run mine line level, into a Placette passive linestage.
--
steveinaz
- transport: squeezebox touch / ci audio ps
- dac: benchmark dac/pre
- linestage: placette passive
- power amplifier: parasound hca-1500a
- speaker
Sounds great, thanks!
Regards
Rolf
--
NoRoDa
NoRoDa's Profile: http://forums.slimdevices.com/member.php?userid=49139
View this thread: http://forums.slimdevices.com/showthread.php?t=91322
NoRoDa;676393 Wrote:
> @soundcheck:
>
> I have been playing around with the PRIOIRQ47.
> Eventually found how to make the changes permanent.
> Don't think that these changes are quite as earth shattering as the tt
> -r and tt -i differences. But I found the value 41 to sound best in my
> system.
andyjayh;676284 Wrote:
> Ah, I figured the other models shared the same basic DAC hardware as the
> base model with additional extras that I didn't need. So I was looking
> at just the DAC1. I have found a local dealer that carries the
> Benchmark range plus W4S & Bel Canto but not Rega. I'll arr
@soundcheck:
I have been playing around with the PRIOIRQ47.
Eventually found how to make the changes permanent.
Don't think that these changes are quite as earth shattering as the tt
-r and tt -i differences. But I found the value 41 to sound best in my
system.
59 beeing to thin and from 1 to 40
SBGK;676304 Wrote:
>
> Am convinced that setting these low priority pids to sched_other is
> making an improvement in sound
So, that makes two of us. ;)
SBGK;676304 Wrote:
>
> tried another 2 events/0 and krcupreemptd which were both sched_fifo
> priority 0 before. Think there is more detail
Solved it
Found the TT file in USR/BIN and edited that one.
--
NoRoDa
NoRoDa's Profile: http://forums.slimdevices.com/member.php?userid=49139
View this thread: http://forums.slimdevices.com/showthread.php?t=91322
15 matches
Mail list logo
