Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-03-03 Thread jeremy
Thanks for all this guys. The nice people at Loud Clear in Edinburgh are going to lend me some Chord Cobra 3 and I'll take it from there. All I'm waiting for now is for the Transporter to arrive! Jeremy -- jeremy

[SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread jeremy
I've ordered my Transporter and it should be with me in a couple of weeks. I've pretty much decided I need to connect via my pre amp rather than direct to the crossover and would welcome advice on how best to do this. System is Naim NAC102 feeding Linn Activ crossover into three NAP250s driving

Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread Phil Leigh
Nice system Jeremy. You should be fine with analogue phono-din and some rothwell attenuators in line... The NAC has quite a sensitive input as I recall - 75mV with 40dB margin? -- Phil Leigh Phil Leigh's Profile:

Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread cliveb
Phil Leigh;183075 Wrote: Nice system Jeremy. You should be fine with analogue phono-din and some rothwell attenuators in line... The NAC has quite a sensitive input as I recall - 75mV with 40dB margin? If you're going to use the unbalanced outputs, then you can set the internal attenuation

Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread tomjtx
My TP sounds better with balanced cable. The unbalanced has a slight bit of hardness in the top end. This may be system dependent. You might want to try both. -- tomjtx tomjtx's Profile:

Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread Phil Leigh
cliveb;183121 Wrote: If you're going to use the unbalanced outputs, then you can set the internal attenuation jumpers - no need to buy external attenuators. oops yes good point! -- Phil Leigh Phil Leigh's Profile:

Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread jeremy
... but is balanced vs unbalanced just a case of a different type of cable? -- jeremy jeremy's Profile: http://forums.slimdevices.com/member.php?userid=3000 View this thread:

Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread Phil Leigh
jeremy;183139 Wrote: ... but is balanced vs unbalanced just a case of a different type of cable? No absolutely not! The cable is different...yes. Three conductors instead of two +/- and ground. But the real point of balanced operation is the ability to reject common-mode noise through

Re: [SlimDevices: Audiophiles] Transporter to Naim pre amp advice please

2007-02-24 Thread sonofcolin
Phil Leigh;183149 Wrote: By all means experiment. However, your Naim equipment is designed to be fed from unbalanced sources. Good advice. Get some Chord Cobra3 cables (RCA -- DIN) or some MoonAudio Black Dragons (my choice). -- sonofcolin