Les Mikesell wrote:
>> [r...@telephony conf.d]# cat /etc/selinux/config
>> # This file controls the state of SELinux on the system.
>> # SELINUX= can take one of these three values:
>> # enforcing - SELinux security policy is enforced.
>> # permissive - SELinux prints warnings instead
>
>
> Is that a cut/paste error or do you actually have targeted uncommented?
> By the way, it takes a reboot to make a change take effect.
>
> --
>Les Mikesell
>lesmikes...@gmail.com
>
>
That wasn't a cut/paste error, targeted came up uncommented from the get go.
I went through the instal
I make the assumption that the hardware is commodity level.
The benefits in cost and performance of commodity hardware cant be
overlooked but because commodity hardware typically lacks redundant power
supplies and uses consumer level hard disks it is more prone to failure.
To combat this you woul
Jeffrey J. Kosowsky wrote at about 13:26:47 -0500 on Friday, December 12, 2008:
> I did the first backup on a new machine but aborted it part way
> through because I had the excludes wrong. It was recorded as a partial
> level 0 backup.
>
> I then ran BackupPC_dump from the command line using
The enclosed script (and a 1-line cmd.exe helper) cleanly and
automatically sets up shadow copies, mounts them, and launches the
rsync daemon without requiring any special configuration or changes to
your existing (non-shadow) rsyncd.conf script. It also cleanly unwinds
all the above when you are d
Jeffrey J. Kosowsky wrote at about 13:26:47 -0500 on Friday, December 12, 2008:
> I did the first backup on a new machine but aborted it part way
> through because I had the excludes wrong. It was recorded as a partial
> level 0 backup.
>
> I then ran BackupPC_dump from the command line using
Jim McNamara wrote:
> On Fri, Dec 12, 2008 at 12:10 PM, Les Mikesell wrote:
>
>> Jim McNamara wrote:
>>> Hello all! I'm normally a Debian guy, but for a project I'm forced to use
>>> CentOS 4.7. I installed BackupPC 3.1.0 from source. I'm trying to get
>>> BackupPC running on that box, and I cann
Just wanted to post up a "me too!"
I started to hand-edit the file just to make it read correctly, but it
may not be such a big deal.
Jeffrey J. Kosowsky wrote:
> I did the first backup on a new machine but aborted it part way
> through because I had the excludes wrong. It was recorded as a par
> Yesterday I read a little about the LVM snapshot, I didn't know that LVM
> had this feature. When I read that suggestion I thought that snapshot
> was a sort of dd. By now I am running a dd on the snapshot, I opened
> some space on the lvm by reducing the root size and created the snapshot.
>
I did the first backup on a new machine but aborted it part way
through because I had the excludes wrong. It was recorded as a partial
level 0 backup.
I then ran BackupPC_dump from the command line using '-i'
(incremental) which completed without errors
The partial backup was (appropriately) repla
On Thu, Dec 11, 2008 at 07:51:57PM -0500, Jeffrey J. Kosowsky wrote:
> John Rouillard wrote at about 17:48:02 + on Thursday, December 11, 2008:
> > On Thu, Dec 11, 2008 at 12:14:48AM -0800, Craig Barratt wrote:
> > > James writes:
> > >
> > > > I have the following config line:
> > > >
>
Hi
Les Mikesell wrote:
> Rodrigo Real wrote:
> The only problem I see is that I don't have disk space to make a
> snapshot and after it to dd the file to the usb disk, I never used this
> snapshot feature, I will see if I can redirect the file as a pipe
> directly to the usb drive
On Fri, Dec 12, 2008 at 12:10 PM, Les Mikesell wrote:
> Jim McNamara wrote:
> > Hello all! I'm normally a Debian guy, but for a project I'm forced to use
> > CentOS 4.7. I installed BackupPC 3.1.0 from source. I'm trying to get
> > BackupPC running on that box, and I cannot seem to get BackupPC_A
Adam Goryachev wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Rodrigo Real wrote:
>> Hello Adam
>>
>> Adam Goryachev wrote:
>>> Step 1) Use LVM's snapshot feature to take a snapshot of your root and
>>> backuppc partitions.
>>> Step 2) dd the snapshot to the two partitions on your US
Rodrigo Real wrote:
The only problem I see is that I don't have disk space to make a
snapshot and after it to dd the file to the usb disk, I never used this
snapshot feature, I will see if I can redirect the file as a pipe
directly to the usb drive.
>>> You could always reduce y
Jim McNamara wrote:
> Hello all! I'm normally a Debian guy, but for a project I'm forced to use
> CentOS 4.7. I installed BackupPC 3.1.0 from source. I'm trying to get
> BackupPC running on that box, and I cannot seem to get BackupPC_Admin (or
> the testsuid script found here -
> http://backuppc.so
Hello all! I'm normally a Debian guy, but for a project I'm forced to use
CentOS 4.7. I installed BackupPC 3.1.0 from source. I'm trying to get
BackupPC running on that box, and I cannot seem to get BackupPC_Admin (or
the testsuid script found here -
http://backuppc.sourceforge.net/faq/debugCGI.htm
Hello,
Holger Parplies wrote:
> Hi,
>
> Adam Goryachev wrote on 2008-12-12 11:09:14 +1100 [Re: [BackupPC-users]
> Backing up the backup to an external USB drive]:
>> Rodrigo Real wrote:
>>> [...]
>>> Adam Goryachev wrote:
>>> The only problem I see is that I don't have disk space to make a
>>>
Hi,
Adam Goryachev wrote on 2008-12-12 11:09:14 +1100 [Re: [BackupPC-users] Backing
up the backup to an external USB drive]:
> Rodrigo Real wrote:
> > [...]
> > Adam Goryachev wrote:
> > The only problem I see is that I don't have disk space to make a
> > snapshot and after it to dd the file to t
19 matches
Mail list logo
