Hi,
ok, here is a dump from -d400 that shows everything between starting the storage daemon and the not-working tape change.
When starting up, the drive has volume 306 from slot 7 loaded. This one
is full and not appendable anymore. It recycles volume 300 and wants it
loaded from slot 1. This
Hi Felix,
On Fri, Oct 14, 2005 at 10:06:57AM +0200, Felix Schwarz wrote:
Thorsten Huber schrieb:
is there somewhere a downloadable archive of the bacula-users and
bacula-devel mailinglists? I cannont find such a service on
sourceforge or any hints in recent mails in the sourceforge
Phil Stracchino wrote:
Yu Safin wrote:
is there any WEB Interface to Bacula that would do some or all of what
you can do with ./bconsole for restores?
Our servers don't have any X but they run Apache.
There is not at this time any Bacula web administration GUI. I believe
several
Hi,
I'm stupid. I found the error right after sending the mail. Half of my volumes where set to slot=0. It's much better now :)On 10/17/05, Christian Theune
[EMAIL PROTECTED] wrote:Hi,
ok, here is a dump from -d400 that shows everything between starting the storage daemon and the
Hello,
On 17.10.2005 09:42, Christian Theune wrote:
Hi,
ok, here is a dump from -d400 that shows everything between starting the
storage daemon and the not-working tape change.
When starting up, the drive has volume 306 from slot 7 loaded. This one
is full and not appendable anymore. It
I'm using an ADIC FastStor22 library with Bacula right now with no
problems. I bought this
library on eBay to get away from the ancient Exabyte library that I had
been using. Although
it was not mentioned in the listing, it seems that the library includes
the optional barcode
reader. None
Hi there,
I try to setup Bacula to backup via an OpenVPN tunnel connection, so far
without luck. If I backup locally to a mounted file it works without problems
however whenever I try to run that same job to store its data to a remote SD,
the connection to the SD somehow stops responding.
frank wrote:
Hi there,
I try to setup Bacula to backup via an OpenVPN tunnel connection, so far
without luck. If I backup locally to a mounted file it works without problems
however whenever I try to run that same job to store its data to a remote SD,
the connection to the SD somehow stops
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Florian
Schnabel
Sent: Monday, October 17, 2005 10:47 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Connection to remote Storage Daemon hangs
frank wrote:
Hi there,
I
I get about ~20 MB/s from my fastest storage, so that's 1200 MB/min, or 1.2
GB/min. You're pulling 300MB/min, or 5 MB/s.
So you might be a touch slow. I have a maximum of 4 jobs running on any given
storage device, however, and usually during fulls on the weekend I've got no
more than 4 jobs
I have successfully setup Bacula with a dozen clients. Server and
clients are running RedHat Enterprise 3 ES. Bacula on the server
was compiled from source, and the clients were installed via RPM.
My last system I need to backup is a RH8 system and I've tried the RH8
RPMs and tried compiling from
Hi,
do you investigated with tcpdump on both servers if there is any
communication between teh systems on the given ports ?
rgds,
Achim
John wrote:
I have successfully setup Bacula with a dozen clients. Server and
clients are running RedHat Enterprise 3 ES. Bacula on the server was
Thank you for the response!
On 10/17/05, Mark Bober [EMAIL PROTECTED] wrote:
I get about ~20 MB/s from my fastest storage, so that's 1200 MB/min, or 1.2
GB/min. You're
pulling 300MB/min, or 5 MB/s.
I thought so, thanks for verifying my sanity.
So you might be a touch slow. I have a
Hi All,
I have this problem where I've got a mix of 20/40GB and 40/80GB DLT
tapes that are in 1 pool configured to backup using 1 tape drive. The
problem is, all of them seem to be acting like 20/40GB tapes including
the higher capacity ones. I've not been able to get the 40/80GB tape to
Anwar Ahmad wrote:
Hi All,
I have this problem where I've got a mix of 20/40GB and 40/80GB DLT
tapes that are in 1 pool configured to backup using 1 tape drive. The
problem is, all of them seem to be acting like 20/40GB tapes including
the higher capacity ones. I've not been able to get the
Hi Phil,
No worries, I've checked that both are DLT2 drives. Specifically they
are HP SureStore Autoloaders. Both were bough at the same time from HP
directly. They were also configured identically. We initially had a
bunch of DLT tapes around (10 or so) from our old HP server which had an
Were the tapes ever used in a DLT1 drive?
---
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
17 matches
Mail list logo
