-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rumko wrote:
> Item n: Spooling data while despooling it
> Origin: Rumko <[EMAIL PROTECTED]>
> Date: 21 June 2006
> Status:
>
> What: Currently when fd runs out of data or maximum spool size is
> reached, the sd starts despooling. While i
In console:
update volume
1: Volume Status
-select pool-
enter media-id (from shown table)
1: Append
Good luck
Ger.
Op donderdag 22 juni 2006 08:24, schreef Przemysław Staniszewski:
> Hi there
>
> I have mistake in my conf and volume was marking as Used. I fix this,
> but how can I r
Hi there
I have mistake in my conf and volume was marking as Used. I fix this,
but how can I remark this volume?
regards
--
Przemysław Staniszewski
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications
Hello AllI'm sorry if I am completely off due to my limited understanding of Bacula. I understand that a retention period is tied to the pool where the volume resides as the tape is labelled then its stored in the database. Is it possible to get Bacula to automatically apply different retention per
Am Wed, 21 Jun 2006 18:31:18 +0200 schrieb Rumko <[EMAIL PROTECTED]>:
> Item n: Spooling data while despooling it
> Origin: Rumko <[EMAIL PROTECTED]>
> Date: 21 June 2006
> Status:
>
> What: Currently when fd runs out of data or maximum spool size is
> reached, the sd starts despooli
> > This is a FYI.
> >
> > Got the following message in bconsole:
> >
> > 20-Jun 00:05 aries-dir: ABORTING due to ERROR in bsys.c:375
> > Mutex lock failure. ERR=Resource deadlock avoided
> > 20-Jun 00:05 aries-dir: Fatal Error because: Bacula
> interrupted by signal
> > 11: Segmentation violation
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dan Langille wrote:
> On 21 Jun 2006 at 22:22, Michel Meyers wrote:
>> I'd like to point out that I've already been doing this for several
>> months (every time I noticed a new beta or stable release, I updated the
>> entries accordingly) and have no p
On 21 Jun 2006 at 22:22, Michel Meyers wrote:
> Dan Langille wrote:
> > Hi folks,
> >
> > The project is looking for someone to keep the Bacula entry on
> > Freshmeat up to date. http://freshmeat.net/projects/bacula/
> >
> > How much work is involved? For every release, you update the details
> >
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dan Langille wrote:
> Hi folks,
>
> The project is looking for someone to keep the Bacula entry on
> Freshmeat up to date. http://freshmeat.net/projects/bacula/
>
> How much work is involved? For every release, you update the details
> on the Freshmea
On Wednesday 21 June 2006 13:59, Daniel Bloemer wrote:
> Hi,
>
> I am trying to run bacula 1.38.6 on a X86-64 bit System with SuSE 10.0
> installed on it.
> I have installed the SuSE 10.0 RPMs from the sourceforge-website. So far
> so good. When I try to start the director it mourns the libpq.so.4
I am combining messages
On 20 Jun 2006 at 14:42, Zakai Kinan wrote:
> I can do that. Let me know what is involved in
> updating the website.
On 20 Jun 2006 at 17:39, Nicholas Accad wrote:
> If no one else volunteers in the next 24 hours, I can do that.
It appears we have two volunteers. That
Hello,
On 6/14/2006 2:42 PM, Nikolai Brieger wrote:
> **bug report
>
>
> problem - cannot read/write on tape with Bacula
> tar and cpio are working but Bacula don't want to read and write on the tape.
> Due to some strange reasons the volume
Hi,
On 6/21/2006 8:19 PM, Emery Guevremont wrote:
...
> Ya I updated my config for bacula-sd.conf, but it didn't change anything.
>
> BTW, I'm running dbcheck in fix mode, and it's fixing a lot of things,
> but I still don't see how that's gonna fix my problem.
>
> Here's the new bacula-sd.conf
Hello,
On 6/21/2006 11:21 AM, Kern Sibbald wrote:
> On Friday 16 June 2006 21:06, Arno Lehmann wrote:
...
>>Interesting option... but please provide us with a good API for all
>>sorts of status changes of jobs, volumes, and the catalog itself :-)
>
>
> Why don't we start by implementing a number
Bill Moran wrote:
In response to Arno Lehmann <[EMAIL PROTECTED]>:
Hi,
On 6/20/2006 7:51 PM, Bill Moran wrote:
In response to Emery Guevremont <[EMAIL PROTECTED]>:
I just upgraded to bacula 1.38.10 and the same problem keeps on
happening. Please and can someone help me out.
... Here's t
Hello,
On 6/21/2006 11:20 AM, Diederik de Vries wrote:
> Hi there,
>
> I have setup bacula, because I think Bacula is one of the best backup
> programs ever. The setup of it was quite difficult though. One of the
> questions I still have is the following:
>
> I've setup 4 machines, with 2 SD's
In response to Arno Lehmann <[EMAIL PROTECTED]>:
> Hi,
>
> On 6/20/2006 7:51 PM, Bill Moran wrote:
> > In response to Emery Guevremont <[EMAIL PROTECTED]>:
> >
> >
> >>I just upgraded to bacula 1.38.10 and the same problem keeps on
> >>happening. Please and can someone help me out.
> >
> ...
Hi,
On 6/20/2006 7:51 PM, Bill Moran wrote:
> In response to Emery Guevremont <[EMAIL PROTECTED]>:
>
>
>>I just upgraded to bacula 1.38.10 and the same problem keeps on
>>happening. Please and can someone help me out.
>
... Here's the config for my bacula-sd.conf file.
>>>
>>>Device {
>>> Nam
Hello,
On 6/20/2006 7:18 PM, Przemysław Staniszewski wrote:
> Hello people :)
>
> I write here because I use backula and I don't know how can I make it
> working.
> My situation:
> - some jobs are scheduled, when the time comes and they don't start
> (because they are offline for example), they
Hi,
On 6/20/2006 6:50 PM, Sullivan, Michael wrote:
> I am trying to get Bacula up and running on a Debian Stable system. I
> have been able to use btape to check out the the ability of the box to
> write to the tape drive - everything seems fine, and I can mount a tape,
> but when I try to run a
> On Wed, 21 Jun 2006 11:20:02 +0200, Diederik de Vries said:
>
> Hi there,
>
> I have setup bacula, because I think Bacula is one of the best backup
> programs ever. The setup of it was quite difficult though. One of the
> questions I still have is the following:
>
> I've setup 4 machines,
Hi folks,
is it possible to configure bacula in
a way that it tells, for example, fd-1 to send back its data-to-be-backed-up
to IP-1
and simultaneously tells fd-2 to send
back its data-to-be-backed-up to IP-2
I'm having this problem, since my director
machine has two NICs each in a
Hi folks,
is it possible to configure bacula in
a way that it tells, for example, fd-1 to send back its data-to-be-backed-up
to IP-1
and simultaneously tells fd-2 to send
back its data-to-be-backed-up to IP-2
I'm having this problem, since my director
machine has two NICs each in a different
I'm new to bacula (v. 1.38.9), and I'm trying to set up an autochanger (Dell
pv132T, 2 drives, 23 LTO2 tapes) so that jobs can use both drives
simultaneously.
Currently, bacula is configured with all volumes in a single pool, and with 4
clients--1 is the local backup server itself, and 3 remote c
Item n: Spooling data while despooling it
Origin: Rumko <[EMAIL PROTECTED]>
Date: 21 June 2006
Status:
What: Currently when fd runs out of data or maximum spool size is
reached, the sd starts despooling. While it is despooling, the fd does
not spool the data until all data has been d
Hi,
Michael Galloway wrote:
> i'm a suse user, but i've always built bacula from src. it builds easily.
Yep, building is easy. But I prefer RPMs since I use this on more than
one maschine ;-)
I'll try the RPM-rebuild tomorrow.
Regards Daniel
--
Daniel Bloemer - BusinessCoDe GmbH
Systemadminist
I'm attempting to move up from 1.38.0 to the latest (1.38.10) again (we've had
no luck with any version past 1.38.0 on our dual 64 bit Centos 4 box, what with
random crashes and memory becoming exhausted)
Tonight, I had a tape error, and it was asking for a new tape, happened around
midnight.
And, here's the logs from OOM killer that killed bacula-dir, in case it means
anything - the system has 4 G of RAM.
oom-killer: gfp_mask=0x1d2
Mem-info:
Node 1 DMA per-cpu: empty
Node 1 Normal per-cpu:
cpu 0 hot: low 32, high 96, batch 16
cpu 0 hot: low 32, high 96, batch 16
cpu 0 cold: low 0, h
i'm a suse user, but i've always built bacula from src. it builds easily.
-- michael
On Wed, Jun 21, 2006 at 01:59:54PM +0200, Daniel Bloemer wrote:
> Hi,
>
> I am trying to run bacula 1.38.6 on a X86-64 bit System with SuSE 10.0
> installed on it.
> I have installed the SuSE 10.0 RPMs from the
> > Yikes. You have corrupt files on disk. Have you had
> hardware problem
> > or OS crashes lately? Or running some funky beta-version of a
> > filesystem
> > ;-)
> >
>
> nah .. ext3 and no crashes
Interesting. Because it really sounds like your filesystem just dropped
a file, which normally
>
> Are you able to do a Bacula tree restore with 6 million files?
>
I needed to split my backups into several jobs, because the bacula-dir
consumed more than 2 gig of RAM,
my largest backup now, is 4,487,947 files, and bacula-dir consumes 1156M
of RAM alone, and you need some RAM for backul
>
> Yikes. You have corrupt files on disk. Have you had hardware problem or
> OS crashes lately? Or running some funky beta-version of a filesystem
> ;-)
>
nah .. ext3 and no crashes
> Also, what version of pg is this? Is it a large/old database, and if so
> are you vacuum:ing regularly?
>
Hi,
I am trying to run bacula 1.38.6 on a X86-64 bit System with SuSE 10.0
installed on it.
I have installed the SuSE 10.0 RPMs from the sourceforge-website. So far
so good. When I try to start the director it mourns the libpq.so.4 as
missing. That library is definitely in the system, but it is in
> > No, postgresql transaction log errors have nothing to do
> with what's
> > in your database. What exactly is the error you get about the logs?
> >
> > //Magnus
>
> i'm getting errors when trying to do a pg_dump of my catalog
> database ...
>
> i already deleted and re-created the database
Doug Sampson wrote:
>> Yesterday I upgraded Bacula on FreeBSD-4.9 from 1.38.9 to
>> 1.38.10. I hadn't
>> seen Bacula crashing or anything before, but today bacula-dir
>> wasn't running
>> and message in console said:
>>
>> 15-Jun 22:00 mybacula-dir: ABORTING due to ERROR in bsys.c:375
>> Mutex
On Monday 19 June 2006 14:16, Peteris Krisjanis wrote:
> p.s. I suppose not a first who bothers this list with this question, but
> as I couldn't find right answer while doing search on list archive, here
> I go...
>
> Hi, my name is Peter and I'm first time Bacula user. At first, I was
> just conf
Hi there,
I have setup bacula, because I think Bacula is one of the best backup programs
ever. The setup of it was quite difficult though. One of the questions I still
have is the following:
I've setup 4 machines, with 2 SD's:
IL1 (Win) -> IL2 (sd)
IL2 (Deb) -> IL3 (sd)
IL3 (Deb) -> IL2 (sd)
L
On Friday 16 June 2006 21:06, Arno Lehmann wrote:
> Hi,
>
> On 6/13/2006 12:01 AM, Kern Sibbald wrote:
> > On Monday 12 June 2006 21:50, Arno Lehmann wrote:
>
> ...
>
> >>My personal preference would be the proliferation of directives... but
> >>then, I do get paid by people who don't want to work
>
> No, postgresql transaction log errors have nothing to do with what's in
> your database. What exactly is the error you get about the logs?
>
> //Magnus
i'm getting errors when trying to do a pg_dump of my catalog database ...
i already deleted and re-created the database but to no avail ..
> my postgresql-log got errors about a missing table ( and an
> index on it) now the wired thing is that table is not defined
> in the create script at all (checked with CVS)
>
> wtf is wrong here ?
Nothing. Bacula forcibly deletes these these objects even if they don't
exist, to make sure they
my postgresql-log got errors about a missing table ( and an index on it)
now the wired thing is that table is not defined in the create script at
all (checked with CVS)
wtf is wrong here ?
it's working like that but i can't backup database since postgresql is
complaining about missing transactio
41 matches
Mail list logo
