Hi all, sometimes it's also important to say that bacula rocks.
Yesterday, one customer loose it's two disk of data on the same raid1.
After changing the two disk, we start restoring the data from bacula.
Some hours after, they can start working today, without any lost.
If someone want to know,
Reynier Pérez Mira wrote:
> Hi every:
> I have a lot of Pools (one for each Client) and I want to move the
> volumes stored in some of those Pools to another Pool for better
> organization. For example I want to move all the volumes from
> SP_F09_STA_Pool to Facultades_Pool. Is that possible? Ho
Dear Bacula Users,
Is there any documentation out there that i can read how to setup
bacula, so when the client online (plug the cable to the network or
through WiFi)
the bacula backup job for that client run automatically after 10
minutes for example ?
Thanks!
Warm Regards,
Wildan Maulana
Open
On 07/13/2009 14:41, sieber wrote:
> I tryied with defcompression and compression...
>
> With estimate command I got:
> *estimate
> The defined Job resources are:
> 1: BackupCatalog
> 2: RestoreFiles
> 3: bkp
> 4: RestoreBkp
> Select Job resource (1-4): 3
> Using Catalog "My
On Mon, Jul 13, 2009 at 2:41 PM, sieber wrote:
>
> I tryied with defcompression and compression...
>
> With estimate command I got:
> *estimate
> The defined Job resources are:
> 1: BackupCatalog
> 2: RestoreFiles
> 3: bkp
> 4: RestoreBkp
> Select Job resource (1-4): 3
> Using Catal
I tryied with defcompression and compression...
With estimate command I got:
*estimate
The defined Job resources are:
1: BackupCatalog
2: RestoreFiles
3: bkp
4: RestoreBkp
Select Job resource (1-4): 3
Using Catalog "MyCatalog"
Connecting to Client cli01 at 192.168.2.2:9102
200
On Mon, Jul 13, 2009 at 12:26 PM, Hayden
Katzenellenbogen wrote:
> John,
>
> For now the DB is on the same raid partition. I our DB admin is building
> a new high availability pair that I will move it onto soon.
>
> The data that I am accessing is local but like you said spooling should
> help I ha
John,
For now the DB is on the same raid partition. I our DB admin is building
a new high availability pair that I will move it onto soon.
The data that I am accessing is local but like you said spooling should
help I have about 1.3T of data. How much should I spool at a time? 50G?
Thanks
H
--
Martin,
I am not using Gzip in Bacula. The drive I have does hardware
compression I thought that would be enough for now. I seem to be getting
about 1.2T on an 800G LTO4 tape.
Here is the iostat output during a full backup. I will try and do the
tar test later this week.
avg-cpu: %user %nice
On Mon, Jul 13, 2009 at 10:41 AM, sieber wrote:
>
> More Information:
> I'm trying do re-run the job after mt-st defcompreeion=1 and compression=1...
>
> using mt-st
> bkp:/etc/bacula# mt-st -f /dev/nst0 status
> SCSI 2 tape drive:
> File number=1, block number=0, partition=0.
> Tape block size 0 b
On Mon, Jul 13, 2009 at 10:22 AM, sieber wrote:
>
> Hello people
> I Have a Bacula installed on Debian Lenny with a sony ait (40/104 GB) Tape
> Drive.
> Bacula is working fine with backups smaller than 40gb.
> But when a try to runa job with 102 GB, bacula writes only something about
> 40/42 GB (
More Information:
I'm trying do re-run the job after mt-st defcompreeion=1 and compression=1...
using mt-st
bkp:/etc/bacula# mt-st -f /dev/nst0 status
SCSI 2 tape drive:
File number=1, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x39 (no translation).
Soft error count since
Hello people
I Have a Bacula installed on Debian Lenny with a sony ait (40/104 GB) Tape
Drive.
Bacula is working fine with backups smaller than 40gb.
But when a try to runa job with 102 GB, bacula writes only something about
40/42 GB (the size of tape without compression).
This way I think: The
2009/7/13 Jose E. Molina :
> Ah Ok, 1 Autochanger with 2 drives should be Ok. My question was more like 2
> separate autochangers doing backups at the same time, defined on the same
> bacula-sd. thanks anyway
>
I have not tested this (do not have the hardware) but concurrency with
2 autochangers o
Hi,
On Mon, 13 Jul 2009, Gavin McCullagh wrote:
> I guess the time to restore is a function of the number of volumes which
> must be consulted and the time seeking through each one. A single file
> restore should always be a single volume but multiple files (or even all
> files) could potentiall
> Few of the important messages I missed are ,
>
>
> 13-Jul 08:59 saturn-sd JobId 2248: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 13-Jul 08:59 saturn-sd JobId 2248: 3302 Autochanger "loaded? drive 0", result
> is Slot 23.
> 13-Jul 08:59 saturn-sd JobId 2248: Error: block.c:275 Volum
-- Forwarded message --
From: John Drescher
Date: Mon, Jul 13, 2009 at 10:08 AM
Subject: Re: [Bacula-users] OT: More about concurrent jobs...
To: "Jose E. Molina"
On Mon, Jul 13, 2009 at 5:42 AM, Jose E. Molina wrote:
> John Drescher escribió:
>> You do not want concurrent jobs
John Drescher escribió:
> You do not want concurrent jobs on your LTO3 but you do with your
> disk? I would have it the other way since disk is generally slower
> than tape. Not using compression with the disk?
>
>
> BTW, I do not know the answer to your real question. I have my disk
> storage on
Hi,
thanks for the response.
On Mon, 13 Jul 2009, Jon Schewe wrote:
> The first thing I notice is that you're doing incremental backups every
> other day. I'd really encourage you to do them everyday if you can,
> otherwise on that odd day you're going to be really unhappy when a disk
> crashes
Gavin McCullagh wrote:
> Hi,
>
> up until now, we've tended to keep backups in a fairly ad hoc manner.
> People looking after a particular system have worked out their own way, be
> it a proprietary backup tool, or a script of some sort. We've started
> setting up bacula and I hope we'll be in a p
Hello,
We have a mix environment of UNIX systems. Few are SuSE and Few are Compaq
TRU64 systems. We have been using Bacula for Linux systems over a year now. And
there is a strong demand to add TRU64 systems in the Bacula. But unfortunately
could not find the Bacula rpm for TRU64 systems ( V5.1
Hi,
up until now, we've tended to keep backups in a fairly ad hoc manner.
People looking after a particular system have worked out their own way, be
it a proprietary backup tool, or a script of some sort. We've started
setting up bacula and I hope we'll be in a position to backup nearly every
sys
Hello,
Few of the important messages I missed are ,
13-Jul 08:59 saturn-sd JobId 2248: 3301 Issuing autochanger "loaded? drive 0"
command.
13-Jul 08:59 saturn-sd JobId 2248: 3302 Autochanger "loaded? drive 0", result
is Slot 23.
13-Jul 08:59 saturn-sd JobId 2248: Error: block.c:275 Volume
23 matches
Mail list logo