Not this one.
I mean webacula.
http://webacula.sourceforge.net
Thanks
CoolAtt
From: moray.hender...@ict-software.org
To: bacula-users@lists.sourceforge.net
Date: Wed, 20 Jan 2010 16:14:38 +
Subject: Re: [Bacula-users] Installation & Configuration of Webaculaadmin
Interface
Dan Langille wrote:
> FYI, FreeNAS comes with Bacula built in. It'll soon have ZFS as well.
Sorry, it appears it already has ZFS.
And not quite built in, but with instructions:
http://freenas.org/documentation:howto:adding_bacula_to_freenas?s[]=bacula
---
Sean M Clark wrote:
> On 2010Jan20 4:07 PM, mehma sarja wrote:
>> What NAS did you get sd working on?
>>
>> Mehma
>> ===
>
> It was a "LaCie 2big network". It took a bit of effort to figure out
> how to get access to get bacula-sd installed, but it's actually been
> running quite well ever since
On 2010Jan20 4:07 PM, mehma sarja wrote:
> What NAS did you get sd working on?
>
> Mehma
> ===
It was a "LaCie 2big network". It took a bit of effort to figure out
how to get access to get bacula-sd installed, but it's actually been
running quite well ever since.
And, yes, I actually DID put i
I just upgraded to 3.0.3 on my Director/SD, and found that the FD crashes every
time I try to take a backup. Restores to the FD seem to work. Installing a
client-only FD from 3.0.1 seems to work just fine though.
Not sure exactly how to report this, or diagnose it better then this, but it is
co
What NAS did you get sd working on?
Mehma
===
On Wed, Jan 20, 2010 at 11:05 AM, Sean M Clark wrote:
> On 2010Jan20 9:19 AM, Carlo Filippetto wrote:
> > I don't know the answare, but if it runs samba means the the SO is
> > linux, so I think you can connect to it with ssh, and there I think
> >
I try to avoid NFS for heavy or prolonged use because of bad experiences. I
have an untried 15-bay Coraid AOE array. What I have accomplished is to
notice that the AOE array disks show up, without re-configuring the kernel,
on a linux box via the LAN and a mount later, it's available for use. I can
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
Not sure if somebody on the users list can answer this, but with a
fileset that has this:
FileSet {
Name = "Backup"
Include {
Options { signature=MD5; }
...
1. Where are the signatures actually generated?
2. Are the signatures checked
On 01/20/10 14:36, Daniel wrote:
> The priority of all jobs is 10, but I would assume that if concurrency were
> an issue that the messages would indicate such?
Concurrency, not priority. But yes, if there was a problem of that kind
I would expect it to result in only one job runnable at a time,
I have the following scenario.
I have a main storage server with a multi-terabyte disk array, but only
SATA, no SCSI. I also have a SCSI LTO-2 drive which, for environmental
reasons, cannot live in the same location as the main storage server.
In order to be able to copy or migrate jobs from the m
On 01/20/10 13:33, Daniel wrote:
> Well I've restarted the director to get a critical job running, but as soon
> as that job finishes I'll run a few more and show you what happens.
> Essentially they show up as:
>
>
> Running Jobs:
> Console connected at 20-Jan-10 13:27
> JobId Level Name
Sean M Clark wrote:
> On 2010Jan20 9:19 AM, Carlo Filippetto wrote:
>> I don't know the answare, but if it runs samba means the the SO is
>> linux, so I think you can connect to it with ssh, and there I think
>> you can put and run one static-bacula-fd and the confing file..
>> If this works well i
On 2010Jan20 9:19 AM, Carlo Filippetto wrote:
> I don't know the answare, but if it runs samba means the the SO is
> linux, so I think you can connect to it with ssh, and there I think
> you can put and run one static-bacula-fd and the confing file..
> If this works well in same folder you will fin
Sendmail for outgoing mail on the server is running just fine and tested at the
commandline. Interesting that you mention this, though. If I accidentally put
more than one email in the mail= line and forgot to replace the %r, will that
cause this effect as well?
-- D
On 20 Jan, 2010, at 12:
On 20 Jan, 2010, at 12:41 , Dan Langille wrote:
> Daniel wrote:
>> On 20 Jan, 2010, at 12:24 , Dan Langille wrote:
>>> Daniel wrote:
Hello,
I am having a problem where all jobs but the first immediately after
starting bacula-dir hang "waiting for execution.". I have no further
>>
Daniel wrote:
> Hello,
>
> I am having a problem where all jobs but the first immediately after starting
> bacula-dir hang "waiting for execution.". I have no further information on
> why they are waiting, nor what they are waiting on. They have waited nearly
> a week. All jobs I queue after
Daniel wrote:
> On 20 Jan, 2010, at 12:24 , Dan Langille wrote:
>
>> Daniel wrote:
>>> Hello,
>>> I am having a problem where all jobs but the first immediately after
>>> starting bacula-dir hang "waiting for execution.". I have no further
>>> information on why they are waiting, nor what they
Well I've restarted the director to get a critical job running, but as soon as
that job finishes I'll run a few more and show you what happens. Essentially
they show up as:
Running Jobs:
Console connected at 20-Jan-10 13:27
JobId Level Name Status
==
Daniel wrote:
> Hello,
>
> I am having a problem where all jobs but the first immediately after starting
> bacula-dir hang "waiting for execution.". I have no further information on
> why they are waiting, nor what they are waiting on. They have waited nearly
> a week. All jobs I queue after
Hello,
I am having a problem where all jobs but the first immediately after starting
bacula-dir hang "waiting for execution.". I have no further information on why
they are waiting, nor what they are waiting on. They have waited nearly a
week. All jobs I queue after them even ones with the s
c.kesch...@internet-mit-iq.de wrote:
> Hi,
> I'm having a problem figuring out how to set up backup jobs with
> unlimited retention periods (all three). Unlimited is probably not
> possible but 100 years is fine. The Volume Retention should be no
> problem, I can just create a new pool and set i
Hi everyone,
Client/Server both 3.02 on linux x64
I have made some encrypted backups from my client, I can successfully
recover from the backup using bconsole. When I try to simulate a machine
crash, by using another machine with the keys and config from the original
client, I get the following e
Hi,
I'm having a problem figuring out how to set up backup jobs with unlimited
retention periods (all three). Unlimited is probably not possible but 100
years is fine. The Volume Retention should be no problem, I can just
create a new pool and set it there. But what about File and Job
Retention
> On Wed, 20 Jan 2010 10:19:41 -0500, Phil Stracchino said:
>
> I personally haven't tried restoring to a client that has multiple
> Filesets defined. I believe Bacula SHOULD Do The Right Thing and
> present you with a superset of the applicable filesets, but you'll have
> to try it to make s
From: CoolAtt NNA [mailto:cool...@live.com]
Hi all..
I need help installing webacula on debian lenny.
The documentation that comes with it is not very detailed.
Please point me to some tutorial or how-to.
Thanks
CoolAtt
http://bacula.org/en/?page=documentation
I expect the most useful on
Hi all..
I need help installing webacula on debian lenny.
The documentation that comes with it is not very detailed.
Please point me to some tutorial or how-to.
Thanks
CoolAtt
_
Windows Liv
On 01/20/10 07:59, CoolAtt NNA wrote:
> Hi All...
>
> I want to backup a client with 2 different filesets each with different
> file retention period.
> please help me how do i proceed.
>
> I have the following in bacula-dir.conf :
>
> Client {
> Name = mypc
> Address = 10.0.0.45
> FDPort
I don't know the answare, but if it runs samba means the the SO is
linux, so I think you can connect to it with ssh, and there I think
you can put and run one static-bacula-fd and the confing file..
If this works well in same folder you will find the mount point of his
disks, and you can find all t
CoolAtt NNA schrieb:
>
> Hi All...
>
> I want to backup a client with 2 different filesets each with different file
> retention period.
> please help me how do i proceed.
>
> I have the following in bacula-dir.conf :
>
> Client {
> Name = mypc
> Address = 10.0.0.45
> FDPort = 9102
> Ca
Hello,
We're planning to move file shares from a windows DC to a dedicated
NAS appliance (something like a thecus N8800 for example).
The NAS I've seen typically run samba, and can be joined to the domain
to set up ACLs, but I've never seen any option to installl bacula fd
on them.
Before decidi
> On Wed, 20 Jan 2010 00:50:30 -0800 (PST), Glynd said:
>
> Some more information on this which may help. I did a show schedules and got
> this:
>
> Schedule: name=WeeklyCycle
> --> Run Level=Incremental
> hour=19
> mday=0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
nunatarsuaq wrote:
> After months of daily backups I was forced to restore a file. I tested
> this process before without any problems but now bacula console is not
> responding when I try to set up the restore process.
>
> For example:
>
> * restore
> Select item: (1-12): 10 (Find the JobIds fo
> On Sun, 17 Jan 2010 22:00:41 -0800 (PST), Glynd said:
>
> Hi Martin,
>
> If this is true then Bacula will dictate when the (in my case) the weekly
> disk has to be swapped out. I would much prefer to do this on a Monday
> morning, but if in 2010, Bacula wants to change on a Friday it will
Hi All...
I want to backup a client with 2 different filesets each with different file
retention period.
please help me how do i proceed.
I have the following in bacula-dir.conf :
Client {
Name = mypc
Address = 10.0.0.45
FDPort = 9102
Catalog = MyCatalog
Password = "abc123" #
nunatarsuaq wrote:
>After months of daily backups I was forced to restore a file. I tested
>this process before without any problems but now bacula console is not
>responding when I try to set up the restore process.
>
>For example:
>
>* restore
>Select item: (1-12): 10 (Find the JobIds for a back
Hello,
I have got the following problem (probably since upgrading to v 3): the
failed jobs tend to "hang" in the running state from the director's
point of view. This causes other jobs to stall (with "... is waiting for
higher priority jobs to finish" or "waiting for maximum concurrent").
In c
After months of daily backups I was forced to restore a file. I tested
this process before without any problems but now bacula console is not
responding when I try to set up the restore process.
For example:
* restore
Select item: (1-12): 10 (Find the JobIds for a backup for a client
before a sp
Some more information on this which may help. I did a show schedules and got
this:
Schedule: name=WeeklyCycle
--> Run Level=Incremental
hour=19
mday=0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30
month=0 1 2 3 4 5 6 7 8 9 10 11
wday
38 matches
Mail list logo