Hi Bacula'ers
Did some of you are going to the FOSDEM (www.fosdem.org) during 6,7 February
2010
in Brussels.
Don't miss the 5th free-beer night event too.
--
Bruno Friedmann
--
Throughout its 18-year history, R
Hi,
21.01.2010 16:47, Mr Gabriel wrote:
> I've managed to get my bacula install up and running pretty well. What I
> want to do now, is to divide up where I store my backups, because some
> are not as important as others. For example, I want to store all our
> current working data in a differen
I note that it is possible to run clone jobs by using "Run = in the Job resource.
What I would like to do is make 2 tapes (Volumes) that are exact copies,
but with only one catalog entry, used if either tape is restored.
1. Does cloning acheive this?
2. Can cloning be performed on a single dri
I think the email issue was the problem. The jobs ran last night. More as I
figure this out. Everyone, thanks VERY much for the help.
-- D
On 20 Jan, 2010, at 13:46 , Phil Stracchino wrote:
> On 01/20/10 14:36, Daniel wrote:
>> The priority of all jobs is 10, but I would assume that if conc
> On Wed, 20 Jan 2010 17:23:34 +, Conor O'Callaghan said:
>
> Hi everyone,
>
> Client/Server both 3.02 on linux x64
>
> I have made some encrypted backups from my client, I can successfully
> recover from the backup using bconsole. When I try to simulate a machine
> crash, by using anoth
> On Wed, 20 Jan 2010 20:56:50 +0100, Michel Meyers said:
>
> Hello,
>
> Not sure if somebody on the users list can answer this, but with a
> fileset that has this:
>
> FileSet {
> Name = "Backup"
> Include {
>Options { signature=MD5; }
> ...
>
>
> 1. Where are the signatures actua
> On Wed, 20 Jan 2010 15:11:03 -0700, Paul Greidanus said:
>
> I just upgraded to 3.0.3 on my Director/SD, and found that the FD crashes
> every time I try to take a backup. Restores to the FD seem to
> work. Installing a client-only FD from 3.0.1 seems to work just fine
> though.
>
> Not sur
On Thu, Jan 21, 2010 at 11:35:34AM -0500, Win Htin wrote:
> I'm sure this may have been asked a few times but here I go again!
>
> What is the proper and safe way to re-assign tapes/old volumes from a
> pool which is no longer in use to back the scratch pool?
If you use bconsole, enter "update v
John Jorgensen wrote:
>> "dan" == Dan Langille writes:
>>
>
> dan> I have about 100 tapes. My tape library holds only 10 tapes.
> dan> How do you decide which tapes to load into the library? What
> strategy do
> dan> you use?
>
> I have a variant of your query
Win Htin pisze:
> What is the proper and safe way to re-assign tapes/old volumes from a
> pool which is no longer in use to back the scratch pool?
>
> Below, the pool "AllDifferentials" is no longer in use and I would
> like to re-assign the volumes "420AAL" and "421AAL" which are
> currently at V
On Thu, January 21, 2010 12:36 pm, John Stoffel wrote:
>> "Dan" == Dan Langille writes:
>
> Dan> On Thu, January 21, 2010 11:30 am, John Stoffel wrote:
> Dan> For simplicity, all my tapes are in a single pool. I'm guessing
> Dan> I want the tapes with the oldest LastWritten value. Something
> "Dan" == Dan Langille writes:
Dan> On Thu, January 21, 2010 11:30 am, John Stoffel wrote:
Dan> For simplicity, all my tapes are in a single pool. I'm guessing
Dan> I want the tapes with the oldest LastWritten value. Something
Dan> like this:
>>
>> I used to do this, but I just switched t
On Thu, January 21, 2010 11:36 am, John Jorgensen wrote:
>> "dan" == Dan Langille writes:
>
> dan> I have about 100 tapes. My tape library holds only 10 tapes.
> dan> How do you decide which tapes to load into the library? What
> strategy do
> dan> you use?
>
> I have a variant
Dan Langille wrote:
> I have about 100 tapes. My tape library holds only 10 tapes.
>
> How do you decide which tapes to load into the library? What strategy do
> you use?
We've gotten a perl-script that gets run as a post-admin script after
eacy cycle. It has knowledge about the Pool, their ret
On Thu, January 21, 2010 11:30 am, John Stoffel wrote:
> Dan> For simplicity, all my tapes are in a single pool. I'm guessing
> Dan> I want the tapes with the oldest LastWritten value. Something
> Dan> like this:
>
> I used to do this, but I just switched to seperate pools for
> incrementals and
Hi everybody,
the cleanest way I found was a script to stop and export the VMs on a
local (to VM server) disk and rsync them on a bacula server disk. In this
manner we can move the VM on another VMserver and save it on tape using
bacula.
I tried also to use the VMWare NFS in order to export dire
Dan> I have about 100 tapes. My tape library holds only 10 tapes.
Dan> How do you decide which tapes to load into the library? What
Dan> strategy do you use?
I'm in the same boat, with fewer tapes, but more slots in the
library.
Dan> Here is what I came up with.
Dan> For simplicity, all my
> "dan" == Dan Langille writes:
dan> I have about 100 tapes. My tape library holds only 10 tapes.
dan> How do you decide which tapes to load into the library? What strategy
do
dan> you use?
I have a variant of your query that orders the volumes by the
date when they should be
Hi folks,
I'm sure this may have been asked a few times but here I go again!
What is the proper and safe way to re-assign tapes/old volumes from a
pool which is no longer in use to back the scratch pool?
Below, the pool "AllDifferentials" is no longer in use and I would
like to re-assign the vol
I have about 100 tapes. My tape library holds only 10 tapes.
How do you decide which tapes to load into the library? What strategy do
you use?
Here is what I came up with.
For simplicity, all my tapes are in a single pool. I'm guessing I want
the tapes with the oldest LastWritten value. Some
I've got the VM backup, but I need more velocity when I restore the machine..
I have 3 ESXi in separate city, obviusly without HA, and a bacula
server in every place..
2010/1/21 Josh Fisher :
> I think there are two schools of thought.
>
> 1. Run FD on the host and backup a snapshot of the runn
I've managed to get my bacula install up and running pretty well. What I
want to do now, is to divide up where I store my backups, because some
are not as important as others. For example, I want to store all our
current working data in a different place to the default.
Do I create a new volume
I think there are two schools of thought.
1. Run FD on the host and backup a snapshot of the running VM's storage.
2. Run FD in the VM and backup as any other machine.
The advantages of 1 are simpler backup and faster, simpler restore in a
disaster recovery situation. The disadvantages of 1 are
I have an existing Bacula system which uses a single tape drive. I
recently added a tape library to that system. The goal is to use the tape
library when I'm going to be away for a while. However, when I'm home,
I'd rather use the single tape drive.
Is there a way to say:
use Storage = DLT un
Carlo Filippetto wrote:
> Hi all,
> I would like to backup my virtual machine VMDK on ESXi 3.5
> There's a way to do it with the machine on and I have a consistent bck?
> What kind of change I have to do?
>
> Otherwise.. I can make a hot clone of my VM and backup it?
>
We tried several times to
Hi all,
I would like to backup my virtual machine VMDK on ESXi 3.5
There's a way to do it with the machine on and I have a consistent bck?
What kind of change I have to do?
Otherwise.. I can make a hot clone of my VM and backup it?
Thank's
CIAO
Carlo
Hi,
I have configured a job as following:
Job {
Name = "Backup-client"
JobDefs = "Usuarios"
FileSet = "Usuario-Windows"
Client = client-fd
Write Bootstrap = "/var/bacula/client.bsr"
Pool = Client
Enabled = yes
Messages = Client
Schedule = "Usuarios Wed 13:00"
Run Before Jo
If I understand well..
you can restore single file, ther's no problem on this, the problem is
if the file is into your backup!!
If you receive the mail an tuesday and you delete it on thursday,
obviusly you can't find it in monday backup
You have to do a full or differential backup every weekend, a
As someone sad,
this problem was discussed few time ago, in other tread
Otherwise, I have got the same problem, my sendmail work fine, but
something where wrong with bacula.
Try disabling 'mailcommand' and 'operatorcommand' of your messages. In
this way you can check if the problem is there. If th
It stops after entering the date or sometimes later after entering
directory list but sooner or later it always happens. I waited max 15
minutes until I killed bconsole (BTW no idea why I have to press Ctr+C
four times and not just one).
2010/1/20 Dan Langille :
> nunatarsuaq wrote:
>>
>> After mo
Hi All..
I want to use bacula for backing up mailboxes(IMAP) /var/vmail/
If I use incremental backups(assuming i start backing up on Monday) & on
thursday i deleted an important file,then I can only restore that file from the
full monday backup.
Prob is if that important file came on tuesday
31 matches
Mail list logo
